Programme
Registration
Tue, 05/09/2023
07:30 - 08:15
07:30 - 08:15
Chaired by: Prof. Djordje Peric (Swansea University)
-
Application of virtual element methods for numerical simulation of inelastic response
P. Wriggers -
Towards the Multiscale Computational Design of Shock-absorbing Metamaterials: (II) From the low-scale to the upper-scale
X. Oliver -
Interaction of particulate fluids and structures. Modelling and computational challenges
E. Oñate
Organized by: Prof. Alessandro Reali (University of Pavia), Prof. Thomas J.R. Hughes (University of Texas), Dr. Guillermo Lorenzo (University of Pavia)
Corresponding Organizer:
Prof.
Alessandro Reali
(University of Pavia)
Chaired by:
Prof. Alessandro Reali
(University of Pavia)
,
Prof. Thomas J.R. Hughes
(University of Texas at Austin)
,
Dr. Guillermo Lorenzo
(University of A Coruña)
-
Keynote
Isogeometric Phase-field Description of Fracture in Complex Shell Structures
J. Kiendl -
Multi-Patch IGA-BEM for Helmholtz Problems using B-spline Tailored Numerical Integration
B. Degli Esposti , A. Falini , T. Kanduc , M. Sampoli , A. Sestini -
Interacting deformable solids at low reynolds using the Isogeometric Divergence-Conforming Immersed Boundary Method
C. Bona Casas , J. Cerda , H. Casquero -
Some Recent Advances in Isogeometric Analysis with a Focus on Structural Applications
A. Reali -
Towards the Implementation of IGA in the Automotive Industry’s Crashworthiness CAE Analysis Workflows
L. Martorell
Organized by: Prof. Zhuo Zhuang (Tsinghua University), Prof. Z.L. Liu (Tsinghua University), Dr. Yinan Cui (Tsinghua University)
Corresponding Organizer:
Prof.
Zhuo Zhuang
(Tsinghua University)
Chaired by:
Prof. Dongfeng Li
(Harbin Institute of Technology, Shenzhen)
,
Prof. Z.L. Liu
(Tsinghua University)
-
Keynote
A concurrent irradiation-mechanics multiscale coupling model
Y. Cui -
Multiscale modeling study on the strengthening effect of coherent precipitates in IN718 superalloy
C. Wan , L. Sun , E. Busso , Z. Zhong , D. Li -
Data-driving based reconstruction for periarticular bone defect and inference and calibration of heterogeneous and anisotropic parameterized constitution
Z. Yan , Y. Hu , Z. Liu , Y. Tian , Z. Zhuang -
A revised Chaboche model to describe static recovery behavior of 316H stainless steel at high temperature
X. Liu , R. Du , Y. Wei -
Finite Element Implementation for Damage-Coupled Inelastic Constitutive Model for P91 Steel at High Temperature
M. Arai , K. Okuno , D. Kashiwagi
Chaired by: Prof. Steve Sun (Columbia University)
-
Plastic deformation based FEM solver to study lithiation in Silicon anode using phase-field modeling
U. Hussain , N. Swaminathan , G. Phanikumar -
Constitutive Modelling of Hydrolytic Degradation in Polymers
Z. Pan , H. Chen , L. Brassart -
Influence of process parameters on elasto-visco-plastic material properties in vat photopolymerization
I. Valizadeh , O. Weeger -
A Constitutive Model for the Simulation of the Behaviour of Polymer Glasses Across a Wide Range of Conditions
G. Owen , D. De Focatiis -
Viscoplastic Constitutive Model for Foam-like Materials
B. Sharma , A. Gogulapati , A. Ramabathiran , V. Menezes -
Modelling of Rate-dependent and Volumetric Inelasticity of Semi-crystalline Polymers Using an Eulerian Framework
M. Kroon , M. Rubin
Organized by: Dr. Aldo Marano (ONERA), Dr. Ricardo Lebensohn (Los Alamos National Laboratory)
Chaired by:
Dr. Aldo Marano
(ONERA)
,
Dr. Ricardo Lebensohn
(Los Alamos National Laboratory)
-
Keynote
Spectral-based chemo-mechanical solvers: connecting microstructure evolution to materials performance
L. Capolungo , D. Bamney -
FFT-Based Models for Multiphysics/Multiscale Applications In Computational Plasticity
R. Lebensohn -
Gibbs Ringing Reduction for an FFT-Based Microstructure Simulation
C. Gierden , J. Waimann , B. Svendsen , S. Reese -
Efficient FFT-based mechanical solvers for abrupt interfaces
A. Finel -
Visualization of the Deep Material Network with Recursive Training
D. Shin , R. Dingreville , R. Alberdi , R. Lebensohn
Chaired by: Dr. Miguel Angel Moreno-Mateos ( Institute of Applied Mechanics, FAU) and Mr. Mohamed Haddad (Université Catholique de Louvain)
-
Fracture-Resistant Ultra-Soft Magnetorheological Elastomers
M. Moreno-Mateos , M. Hossain , P. Steinmann , D. Garcia-Gonzalez -
Multiscale Degenerated Kinematics (MDK) Approach for the Design of Next Generation Laminated Composite Materials
P. Wierna , D. Yago Llamas , O. Lloberas-Valls , A. Huespe , J. Oliver Olivella -
Modelling of Crack Propagation in Finite Thickness Brittle Adhesive Layers
S. Sharma , A. Ramaswamy -
Viscoelastic-viscoplastic polymer composites: Development and evaluation of the two dissimilar mean field homogenization models
M. Haddad , I. Doghri -
Bayesian Inverse Analysis Application to Pyroplastic test in Ceramic Materials
J. Gómez , D. Araya , J. García-Ten , J. Tiscar
Organized by: Prof. Valentina A. Salomoni (University of Padova), Dr. Riccardo Fincato (Osaka University)
Corresponding Organizer:
Prof.
Valentina Salomoni
(University of Padova)
Chaired by:
Prof. Andrew Ruggiero
(University of Cassino and Southern Lazio)
-
Numerical simulations of new biaxial experimentson ductile damage of thin thin sheet metal under non-proportional loading conditions
S. Gerke , F. Ramón Valencia , M. Brünig -
Numerical Analysis of Ductile Damage and Fracture Behavior of Aluminum Alloys under Biaxial Reverse Loading Experiments
Z. Wei , S. Gerke , M. Brünig -
A Surrogate Model for Strain Localisation in Finite Element Analysis of Ductile Failure
H. Næss , D. Morin , O. Hopperstad -
Machine Learning Based Localization Prediction Under Non-Proportional Loading
M. Kõrgesaar , M. Yatkin -
Bifurcation Theory of Plasticity, Damage and Failure
A. Umantsev
Organized by: Prof. Koichi Hashiguchi (MSC Software, Ltd.), Dr. Motoharu Tateishi (MSC Software, Ltd.), Dr. Yuki Yamakawa (Tohoku University)
Corresponding Organizer:
Prof.
Hashiguchi Hashiguchi
(MSC Software, Ltd.)
Chaired by:
Prof. Hashiguchi Hashiguchi
(MSC Software, Ltd.)
-
Keynote
Development of nonlinear kinematic hardening modeling concepts for simulation of low-cycle fatigue and creep responses
T. Hassan , S. Quayyum , N. Islam , R. Ahmed -
A subloading damage surface model for Mullins effect of rubber-like solids
J. Yoshida , K. Hashiguchi -
The Subloading Surface Concept in the Modeling of Complex Inelastic Soil Behaviour
J. Maranha -
Assessment of elastoplastic and viscoplastic models
K. Hashiguchi
Chaired by: Prof. Olivier Allix (ENS Paris-Saclay) and Prof. Riccardo Rossi (CIMNE/UPC)
-
Optimal assumptions for 2D predicted thermal fields during directed energy deposition
C. Gallo , L. Duchene , A. Habraken -
Optimal hyper-reduction algorithms in reduced order modelling: Continuous and Local approaches
J. Hernandez Ortega , J. Bravo Martinez , S. de Parga Regalado , R. Rossi Bernecolli -
A Petrov-Galerkin Method for Hyper-Reduced Order Modeling of Symmetric and Nonsymmetric Problems without Complementary Meshes
S. Ares de Parga Regalado , J. Bravo Martinez , J. Hernandez Ortega , R. Zorrilla Martínez , R. Rossi Bernecoli -
On a wave-based reduced order method for transient dynamic computation including medium frequency.
O. Allix , P. Ladevèze -
Modeling creep deformation of short fiber reinforced plastics using Deep Material Networks for parameter identification and upscaling
A. Dey , F. Welschinger , M. Schneider , S. Gajek , T. Böhlke -
GNN-Assisted Phase Space Integration with Application to Atomistics
S. Saxena , J. Bastek , M. Spinola , P. Gupta , D. Kochmann
Organized by: Prof. Francisco Chinesta (ESI GROUP Chair, ENSAM ParisTech), Prof. Elias Cueto (Universidad de Zaragoza), Prof. Benjamin Klusemann (Leuphana University of Lüneburg), Prof. Francisco J. Montáns (Universidad Politécnica de Madrid)
Corresponding Organizer:
Prof.
Elias Cueto
(Universidad de Zaragoza)
Chaired by:
Prof. Elias Cueto
(Universidad de Zaragoza)
,
Prof. Francisco Chinesta
(ESI GROUP Chair, ENSAM ParisTech)
-
Keynote
Elasto-plasticity in Data Poor Regimes with Convex Model-Data-Driven Yield Functions
M. Marino , J. Fuhg , A. Fau , N. Bouklas -
Constitutive Modeling of Woven Composites based on Artificial Neural Networks informed by Multi-scale Analyses
M. El Fallaki Idrissi , F. Praud , F. Meraghni , F. Chinesta , G. Chatzigeorgiou -
Data-driven Models For Shrinkage Porosity Prediction In Aluminium Casting
M. Nouri , J. Artozoul , A. Caillaud , A. Ammar , F. Chinesta , O. Köser -
Prediction of cross-sectional geometric features of SPR joints based on the punch force-displacement curve using machine learning
B. Ferrándiz , M. Daoud , F. Chinesta
Organized by: Prof. Wei Wu (University of Natural Resources and Life Sciences), Prof. Koichi Hashiguchi (MSC Software, Ltd.), Yuki Yamakawa (Tohoku University)
Chaired by:
Prof. Wei Wu
(University of Natural Resources and Life Sciences, Vienna)
,
Prof. Yuki Yamakawa
(Tohoku University)
,
Prof. Hashiguchi Hashiguchi
(MSC Software, Ltd.)
-
Micro-inspired constitutive modelling of clays based on thermodynamics
A. Amorosi -
Reconstruction of Cam-clay model based on finite deformation theory guaranteeing the existence of the state boundary surface
Y. Abe , S. Yamada , K. Hoshi , T. Kyoya -
State Parameter-Dependent Soil Constitutive Model
S. Jockovic , N. Obradovic , M. Vukicevic -
Recent Advances in Anisotropic Hypoplastic Models for Granular Soils
Z. Yang , D. Liao -
Finite element analysis of Expansive bedrock based on the Multiplicative decomposition of the Deformation gradient
K. Hoshi , S. Yamada , Y. Abe , T. Kyoya
Organized by: Prof. Jean Philippe Ponthot (University of Liège), Prof. Carlos Agelet de Saracibar (CIMNE/UPC)
Corresponding Organizer:
Prof.
Jean Philippe Ponthot
(University of Liège)
Chaired by:
Prof. Jean Philippe Ponthot
(University of Liège)
,
Prof. Carlos Agelet de Saracibar
(CIMNE/UPC)
-
Keynote
An LBB-stable tetrahedral finite element based on a Pseudo-Random Integration (PRI) method for finite strain von Mises elasto-plasticity
E. Feulvarch , A. Brosse , Y. Vincent -
Eulerian Modeling of Large Plastic Deformation of Crystals With Applications to Micro-pillars
J. Smiri , O. Salman , I. Ionescu -
Application of Particle Finite Element Method in Ultrasonic Vibration-Assisted Machining
H. Bakhshan , J. Carbonell , E. Oñate -
Simplified and Complete Models for Hot Forming a Complex Industrial Part
S. Rangasamy Mahendren , O. Pantale , Y. Marcel , O. Dalverny -
Efficient Virtual Process Modeling of Metallic Bipolar Plate Stamping
L. Gassler , M. Afrasiabi , M. Bambach
Organized by: Dr. Emilio Martinez-Pañeda (Imperial College London), Prof. Christian Niordson (Technical University of Denmark), Prof. Benjamin Klusemann (Leuphana University of Lüneburg)
Corresponding Organizer:
Prof.
Emilio Martinez-Pañeda
(University of Oxford)
Chaired by:
Prof. Christian Niordson
(Technical University of Denmark)
-
Keynote
Phase-field modeling of pitting and mechanically-assisted corrosion of Mg alloys for biomedical applications
S. Kovacevic , W. Ali , E. Martínez-Pañeda , J. LLorca -
Evolution of precipitates in Al alloys using Phase-field method
R. Chafle , E. Mathew , A. Safi , B. Klusemann -
A phase-field based electro-chemo-mechanical model for predicting voiding in all-solid-state batteries
E. Martínez-Pañeda , R. Wang , Y. Zhao -
An advanced multi-phase field approach for coupled electro-chemo-mechanical problems using the preCICE library applied to fcc grain microstructure
C. Kandekar , A. Ravikumar , D. Höche , W. Weber -
Towards a sharp phase-field method: a hybrid diffuse-semisharp approach for microstructure evolution problems
J. Dobrzanski , S. Stupkiewicz
Organized by: Prof. Ikumu Watanabe (National Institute for Materials Science), Prof. Joao Quinta da Fonseca (University of Manchester)
Corresponding Organizer:
Prof.
Ikumu Watanabe
(National Institute for Materials Science)
Chaired by:
Prof. Ikumu Watanabe
(National Institute for Materials Science)
-
Keynote
Characterization of Mechanical Properties of Alloys using Instrumented Indentation Test
I. Watanabe , T. Chen , D. Liu -
The Development of Grain Structure During Additive Manufacturing: a Comparison Between Experiment and Simulation
P. Voorhees , A. Chadwick , A. Birnbaum , J. Michopoulos , J. Santos Macias , M. Upadhyay , G. Wagner -
Bridging Length Scales in Texture Prediction using Multi-Fidelity Gaussian Processes
M. Atkinson , P. Shanthraj , T. Dodwell , J. Quinta da Fonseca -
Multiscale Modelling of Hydrogen Diffusion Induced Damage in Alloy
T. Tan , I. Watanabe
Organized by: Dr. Gergely Molnár (INSA de Lyon /CNRS), Prof. Anthony Gravouil (INSA Lyon), Prof. Guillaume Kermouche (Ecole des Mines de Saint-Etienne)
Corresponding Organizer:
Dr.
Gergely Molnar
(INSA de Lyon / CNRS)
Chaired by:
Dr. Gergely Molnar
(INSA de Lyon / CNRS)
-
Insights from the quantitative calibration of an elasto-plastic model from a Lennard-Jones atomic glass
D. Fernandez-Castellanos , S. Roux , S. Patinet -
Atomistic Simulations, Mesoscale Modelling and Micromechanical Testing of Crack-Microstructure Interactions
E. Bitzek -
Strong and Ductile Metallic Glass Films through Advanced Nanoarchitectural Design Strategies
F. Bignoli , A. Brognara , P. Djemia , D. Faurie , A. Li Bassi , G. Dehm , M. Ghidelli -
Scale bridging evaluation of the fracture behavior of an advanced TiAl alloy
M. Burtscher , O. Can Sen , M. Alfreider , A. Chauniyal , R. Janisch , D. Kiener -
Multi-scale modeling of damage in woven composites
A. Doitrand -
Multi-scale Failure in Architectured Materials
E. Eid , R. Seghir , J. Réthoré
Chaired by: Prof. Peter Wriggers (Leibniz University of Hannover)
Chaired by: Prof. Javier LLorca (Universidad Politécnica de Madrid)
-
Role of temperature and preexisting dislocation network on shock compression of copper crystals
I. Bryukhanov -
Grain microstructure evolution using orientation phase field and Cosserat crystal plasticity
I. Tandogan , M. Budnitzki , S. Sandfeld -
A Data-Based Derivation of Internal Correction Stress for the Coarse-Graining in Dislocation-Based Plasticity
S. Lee , K. Schulz -
Diffusion Effect on the Cohesive Zone Model of SiC/Al Interface using Atomistic Simulations
M. Tahani , E. Postek , T. Sadowski -
Inelastic rotations in crystal plasticity
O. Salman , A. Ahadi
Organized by: Prof. Zhuo Zhuang (Tsinghua University), Prof. Z.L. Liu (Tsinghua University), Dr. Yinan Cui (Tsinghua University)
Chaired by:
Prof. Xiaoming Liu
(Chinese Academy of Sciences)
-
Keynote
Numerical and theoretical modelling for the elastic-plastic backface deformation of ultra-high molecular weight polyethylene laminate under ballistic impact
S. Yang , Z. Liu -
Incorporating Void Formation and Growth Into the Vector-Density-Based Continuum Dislocation Dynamics Approach
P. Lin , V. Vivekanandan , A. El-Azab -
Characterizing The Elasto-Plastic Anisotropic Mechanical Property Of Cancellous Bone Via a Baysian Calibration Method
Z. Yan , Z. Liu , Z. Zhuang -
A Fracture Mechanics-Based Approach for Cylindrical Cavity Expansion in the Elastoplastic Medium
Y. Gao , Z. Liu , Z. Zhuang , E. Detournay -
Mechanical Modeling of WC-Co Composites at Microscale Using Extreme Value Statistics and Realistic FE Meshes
P. Sousa Machado , F. Caner , E. Jimenez-Pique , L. Llanes
Chaired by: Prof. Marc Geers (Eindhoven University of Technology)
-
Finite Strain Rate-Independent Single Crystal Plasticity Algorithm Based on Interior-Point Methods
A. Niehüser , J. Mosler -
Residual Stress Estimation of Ceramics during Sintering Process with Finite Strain and Viscoplasticity
C. Natsumeda , K. Matsui , J. Tatami , T. Yamada -
Crystal plasticity simulation of in-grain microstructure and microtexture evolution during large deformation
K. Sedighiani , K. Traka , M. Diehl , F. Roters , J. Sietsma , D. Raabe -
A study of alpha morphology on the local plasticity and texture development of alpha-beta Ti alloys
G. Bowker , A. Plowman , J. Quinta da Fonseca , P. Shanthraj -
Orientation-dependent Lath Martensite Yielding Controls the Hardening Behavior of Quenched Martensitic Steels
V. Rezazadeh , R. H.j. Peerlings , J. P.M. Hoefnagels , F. Maresca , M. G.D. Geers -
Finite-Strain Thermomechanics of Viscoelastic-Viscoplastic Model for Thermoplastic Polymers
U. Jinaga , K. Zulueta , L. Noels
Organized by: Dr. Aldo Marano (ONERA), Dr. Ricardo Lebensohn (Los Alamos National Laboratory)
Chaired by:
Dr. Aldo Marano
(ONERA)
,
Dr. Ricardo Lebensohn
(Los Alamos National Laboratory)
-
A fft based method for mesoscale continuum dislocation mechanics with defect energy
S. Berbenni , R. Lebensohn , V. Taupin -
Combining Diffraction Microstructure Iimaging and FFT Simulations to Study Polycrystal Plasticity
C. Ribart , A. Marano , W. Ludwig , H. Proudhon -
Construction of a model of Field Dislocation Mechanics applied to the viscoplastic behaviour of Uranium Dioxide
É. Castelier , H. Bouizem , V. Taupin -
FFT-based Crystal Plasticity Study On Strain Localization In Irradiated Austenitic Stainless Steel
A. Lame Jouybari , S. El Shawish , L. Cizelj -
FFT-based modeling of intragranular slip localization modes within polycrystals
A. Marano , L. Gélébart , S. Forest -
An FFT Based Discrete Slip Plane Approach to Simulate the Deformation of Tungsten Nanofoams
C. Ruestes , J. Segurado
Organized by: Prof. Gerhard A. Holzapfel (Graz University of Technology), Prof. José Manuel García-Aznar (University of Zaragoza), Dr. Adrian Buganza Tepole (Purdue University)
Corresponding Organizer:
Prof.
Gerhard Holzapfel
(Graz University of Technology)
Chaired by:
Prof. Gerhard Holzapfel
(Graz University of Technology)
,
Prof. Jose Manuel Garcia-Aznar
(University of Zaragoza)
-
Macro and Microscale Mechanics of Abdominal Aortic Aneurysms
M. Terzano , M. Dalbosco , G. Holzapfel -
A Novel Methodological Approach for Process Design in Extrusion-based Bioprinting
F. Chirianni , G. Vairo , M. Marino -
3D reconstruction of an orientation distribution from planar projections according to the principle of maximum entropy
M. Wollner , A. Pukaluk , C. Holzer , G. Holzapfel -
In-vitro experimental modelling and computational simulations of tumour organoid growth
J. Garcia-Aznar -
Modeling the Microstructure of Artery Walls with a Focus on Collagen Cross-Links
G. Holzapfel -
Mechanics and Mechanobiology of Cutaneous Wounds: Hypothesis Testing with a Computational Model
M. Pensalfini , A. Buganza
Organized by: Prof. Valentina A. Salomoni (University of Padova), Dr. Riccardo Fincato (Osaka University)
Corresponding Organizer:
Prof.
Valentina Salomoni
(University of Padova)
Chaired by:
Dr. Steffen Gerke
(Universität der Bundeswehr München)
-
Ductile Fracture in Shear Sensitive Materials: Mechanisms and Modeling
N. Bonora , G. Iannitti , A. Ruggiero , G. Testa -
Phase Field Modelling of Ductile Fracture in the Context of Continuum Damage Mechanics
A. Tsakmakis , M. Vormwald -
Micromechanical study of loading path effects on ductile failure
S. Keralavarma , M. Chouksey -
Damage Regularization Via The Eikonal Gradient Non-Local Method: Properties And Couplings With Plasticity
E. Baranger , F. Marconi , R. Desmorat , M. Jirasek , M. Horak
Organized by: Prof. Elena Benvenuti (Università degli Studi di Ferrara), Prof. Antonio Rodriguez Ferran (Technical University of Catalonia), Prof. Guglielmo Scovazzi (Duke University)
Corresponding Organizer:
Prof.
Elena Benvenuti
(Università degli Studi di Ferrara)
Chaired by:
Prof. Elena Benvenuti
(Università degli Studi di Ferrara)
,
Prof. Antonio Rodríguez Ferran
(Universitat Politècnica de Catalunya)
-
Keynote
A Fourth-order Phase-field Fracture Model: Formulation and Numerical Solution using a Continuous/Discontinuous Galerkin Method
L. Svolos , H. Mourad , G. Manzini , K. Garikipati -
Enriched Virtual Elements for Two-dimensional Elastic Fracture
E. Artioli , L. Mascotto -
A Locally Adaptive Phase-Field Model with Transition to Fracture
A. Muixí , O. Marco , S. Fernández-Méndez , A. Rodríguez-Ferran -
Recent advances of the regularized extended finite element method for continuous-discontinuous transition and cracking processes
E. Benvenuti -
Discontinuous Galerkin Modeling of Wave Propagation in Damaged Brittle Materials
B. Goument , J. Zinszner , I. Ionescu
Chaired by: Prof. Dr. Lucia Barbu (CIMNE/UPC)
-
A continuum damage model for the anisotropic material response of paper and paperboard
B. Boes , J. Simon -
Experimental and Computational Failure Analysis of Fused Filament Fabrication Parts
I. Rivet , N. Dialami , M. Cervera , M. Chiumenti -
Numerical assessment of the influence of cutting operations in the fatigue strength of metals
L. Gonçalves Junior , S. Jiménez , A. Cornejo , L. Barbu , S. Oller , D. Gustafsson , E. Olsson -
Nonlinear Numerical Investigation of Corrugated Steel Plate Shear Walls With Different Geometries
S. Safaeifaegh , G. Zanon , O. Bursi , E. Safaeifaegh -
A coupled inelastic-damage and multi-species transport model for concrete strcutures degradation
B. Selma -
A Fatigue Design Framework for Additively Manufactured Cellular Materials
D. Barba , A. Vázquez Prudencio , C. Garrido Fernandez de Vera
Chaired by: Prof. Stefanie Reese (RWTH Aachen University)
-
Deep Learning Approach for Coronary In-stent Restenosis Using Physics-informed Neural Networks
J. Shi , K. Manjunatha , S. Reese -
Use of Machine Learning in Determining the Parameters of Viscoplastic Models
J. Halamka , J. Kuželka , M. Bartošák , M. Španiel -
Inverse Design of Voxelized Architected Materials
X. Zheng , I. Watanabe -
Towards the Identification of Crystal Plasticity Laws by Digital Twin and Machine Learning
D. Mesbah , D. Ryckelynck , H. Proudhon , L. Gelebart
Organized by: Prof. Wei Wu (University of Natural Resources and Life Sciences), Prof. Koichi Hashiguchi (MSC Software, Ltd.), Yuki Yamakawa (Tohoku University)
Chaired by:
Prof. Wei Wu
(University of Natural Resources and Life Sciences, Vienna)
,
Prof. Hashiguchi Hashiguchi
(MSC Software, Ltd.)
,
Prof. Yuki Yamakawa
(Tohoku University)
-
A constitutive model for structured soils under saturated and unsaturated conditions
B. Dai , Q. Mu , C. Zhou -
Hyperelastic constitutive models for geomaterials: Extension of existing models to include finite strains and coupling with plasticity
Y. Yamakawa , A. Ueda -
A 3D Discrete Element Model For Studying Soil-Structure Interaction On Shallow Foundations Subjected To Seismic Load
B. Al Tfaily , R. Aboul Hosn , A. Bennabi , L. Sibille -
Forecast System for Rain-Induced Landslides Using Transient Finite Element Digital Twins
S. Commend , J. Minini , C. Buchs , G. Jacot-Descombes -
DEM-CFD Coupling Simulation Research on the Seepage Erosion Process in Underground Structures
X. Liu , Q. Sun , S. Fan , W. De Corte , L. Taerwe -
Small scale simulations of hydraulic frcturing in rocks with a novel mesoscopic thermo-hydro-mechanical approach
M. Krzaczek , J. Tejchman
Organized by: Prof. Shohei Kajikawa (The University of Electro-Communications), Prof. Takashi Kuboki (The University of Electro-Communications), Prof. Takahiro Makiyama (Institute of Technologists)
Corresponding Organizer:
Dr.
Shohei Kajikawa
(The University of Electro-Communications)
Chaired by:
Dr. Shohei Kajikawa
(The University of Electro-Communications)
,
Dr. Takahiro Makiyama
(Institute of Technologists)
-
Improved Accuracy of Edge Crack Analysis of High Strength Steel Sheets
S. Okubo , Y. Otake , S. Nishida , T. Nedachi -
Research on Obtatining High Precision Forming Limit Diagram of High Tensile Strength Steel
Y. Otake , S. Okubo , S. Nishida , T. Nedachi -
Analytical Study on Effect of Taper Angle And Roller Diameter on Twist Shape in Twist Rolling
T. Kuboki , T. Makiyama , A. Kumar , S. Kajikawa -
Sheet-Metal Bending Behaviour Considering Strain Rate and Bauschinger Effect in Finite Element Analysis
T. Muraoka , Y. Okude , S. Kajikawa , T. Kuboki -
Relation Between Classic and Fracture Mechanics Applied to the Evaluation of Residual Strength of Corroded Reinforcements
C. Andrade
Organized by: Dr. Emilio Martinez-Pañeda (Imperial College London), Prof. Christian Niordson (Technical University of Denmark), Prof. Benjamin Klusemann (Leuphana University of Lüneburg)
Corresponding Organizer:
Prof.
Emilio Martinez-Pañeda
(University of Oxford)
Chaired by:
Prof. Emilio Martinez-Pañeda
(University of Oxford)
-
Keynote
How to descirbe fatigue cracks with Griffith’s fracture theory?
R. Alessi , J. Ulloa -
Accelerated Fatigue Crack Growth Analysis Based on Phase Field Modeling
P. Kristensen , A. Golahmar , E. Martínez-Pañeda , C. Niordson -
Modular phase-field modelling of fatigue fracture
T. Schneider , M. Kalina , M. Kästner -
Phase Field Modelling of Fatigue in Inert and Hydrogen-containing Environments
A. Golahmar , C. Niordson , E. Martínez-pañeda -
A viscous gradient-enhanced damage model for fatigue
H. Kök , P. Junker
Organized by: Prof. Ikumu Watanabe (National Institute for Materials Science), Prof. Joao Quinta da Fonseca (University of Manchester)
Corresponding Organizer:
Prof.
Ikumu Watanabe
(National Institute for Materials Science)
Chaired by:
Prof. Joao Quinta da Fonseca
(University of Manchester)
,
Prof. Kazumi Matsui
(Yokohama National University)
-
Keynote
Validating Crystal Plasticity Modelling Predictions of Strain Localization at the Microstructural Scale
J. Quinta da Fonseca , M. Atkinson , D. Hu , C. Dichtl , D. Lunt -
Understanding bending of aluminium sheets through crystal plasticity simulations
L. González Duque , J. Quinta da Fonseca , J. Robson , E. Cantergiani , Z. Liang , C. Leppin -
Crystal plasticity modelling of the effect of microtextured regions on the strain localisation of forged Ti-6Al-4V.
P. Curran , P. Shanthraj , P. Prangnell , B. Dod , N. Byres , M. Atkinson , A. Plowman , D. Hu , J. Quinta da Fonseca
Organized by: Dr. Gergely Molnár (INSA de Lyon /CNRS), Prof. Anthony Gravouil (INSA Lyon), Prof. Guillaume Kermouche (Ecole des Mines de Saint-Etienne)
Corresponding Organizer:
Dr.
Gergely Molnar
(INSA de Lyon / CNRS)
Chaired by:
Dr. Gergely Molnar
(INSA de Lyon / CNRS)
-
From microstructure to fracture toughness
G. Molnar , S. Lévay -
Development of a Homogenized Thermomechanical Model for the Optimized Design of Fiber Optic Gyroscopes
P. Busnel , J. Pillon , F. Louf , M. Rattier , P. Boucard -
Coupling between mechanical stresses and lithium penetration in a lithium ion battery
A. Saidi , A. Tanguy , M. Fourmeau , G. Molnar , A. Boucherif , D. Machon
Wed, 06/09/2023
08:15 - 08:45
08:15 - 08:45
Chaired by: Prof. Marc Geers (Eindhoven University of Technology)
Organized by: Prof. Fadi Aldakheel (Leibniz Universität Hannover), Prof. Edoardo Artioli (Università degli Studi di Roma Tor Vergata), Mr. Lourenço Beirão Da Veiga (Università di Milano-Bicocca), Prof. Peter Wriggers (Leibniz University of Hannover)
Corresponding Organizer:
Prof.
Fadi Aldakheel
(Leibniz Universität Hannover)
Chaired by:
Prof. Fadi Aldakheel
(Leibniz Universität Hannover )
,
Prof. Peter Wriggers
(Leibniz University of Hannover)
-
Some Virtual Element Methods for elasticity problems
C. Lovadina , M. Visinoni -
A Node-Based Uniform Strain Virtual Element Method for Elastoplastic Solids
A. Ortiz-Bernardin , E. Artioli -
A Hu-Washizu Variational Formulation of 2D Self-Stabilized Virtual Elements
M. Cremonesi , U. Perego , A. Lamperti , A. Russo , C. Lovadina -
The high order Bulk-Surface Virtual Element Method in 3D
M. Frittelli , F. Dassi , A. Madzvamuse -
Adaptive Mesh Refinement Procedures for the Virtual Element Method
D. van Huyssteen , F. Rivarola , G. Etse , P. Steinmann -
A Stabilization-free Virtual Element Method for Finite Strain Applications
B. Xu , P. Wirggers
Organized by: Prof. Francisco J. Montáns (Universidad Politécnica de Madrid), Prof. Luis Barrales-Mora (Georgia Institute of Technology), Prof. Francisco Chinesta (ENSAM ParisTech), Dr. Luis Saucedo-Mora (Universidad Politécnica de Madrid)
Corresponding Organizer:
Prof.
Francisco Javier Montáns Leal
(Universidad Politécnica de Madrid)
Chaired by:
Phd. Juan Garcia-Martinez
(INTA)
,
Dr. Luis Saucedo Mora
(Universidad Politécnica de Madrid)
-
Melt Track Morphology Based Optimisation in LPBF with Deep Learning
T. Wilkinson , M. Casata , D. Barba -
Investigating the Effect of Size and Orientation on the Quality of LPBF Metamaterial Cells in TI64
M. Casata , S. Perosanz Amarillo , D. Barba Cancho -
On the Influence of the Lattice Geometry on the Mechanical Properties of Additively Manufactured Metamaterials
C. Garrido , E. Alabort , D. Barba -
Experimental and CPFEM based study on IN738LC superalloy processed by laser powder bed fusion
J. Chen , J. Xu , J. Moverare , L. Barrales-Mora -
A Gibson-Ashby Model for Graded 2D Cellular Solids
M. Beigrezaee , S. Jalali , D. Misseroni , N. Pugno
Chaired by: Prof. Ignacio Romero Olleros (Universidad Politécnica de Madrid) , Prof. Miguel Vaz Jr. (State University of Santa Catarina)
-
Topology Optimization of Elasto-plastic Microstructure Using FFT-based Homogenization
M. Matsui , H. Hoshiba , K. Nishiguchi , H. Ogura , J. Kato -
Topology Optimization Method for Elastoplastic Multimaterial Models to Improve Toughness
M. Fujiwara , H. Hoshiba , K. Nishiguchi , J. Kato -
Identification of Material Parameters using Multiple Data Sets based on Multi-objective Optimization
M. Vaz Jr. -
Reaction-Diffusion Equation-Based Topology Optimization of Lightweight Elastoplastic Structures by Exact Volume Constraint
Y. Cui , T. Takahashi , T. Matsumoto -
Bayesian Calibration of Complex Models. Application to Elasto-plastic Constitutive Relations under High-strain Rates and Temperature
I. Romero , J. de Pablos , I. Sabirov -
Applications of Elastoplastic Constitutive Model in Surface Design of Bed Mattresses using Finite Element Method
M. Sakurai , T. Nonomura , Y. Shimura , A. Sakuma , H. Kimura , H. Miyaki , M. Terai
Organized by: Dr. Fengxian Liu (University of Twente), Dr. Haiyang Yu (Uppsala University), Prof. Edmund Tarleton (Oxford Micromechanics Group)
Corresponding Organizer:
Dr.
Fengxian Liu
(University of Twente)
Chaired by:
Dr. Haiyang Yu
(Uppsala University)
,
Dr. Fengxian Liu
(University of Twente)
-
Multiscale crystal plasticity modeling of dislocation structure formation in additively manufactured stainless steel
N. Grilli , D. Hu , W. Yan -
Dislocation climb driven by lattice diffusion and core diffusion
F. Liu , A. Cocks , E. Tarleton -
Atomistically-informed Hardening and Kinetics Models of Helium Bubble in Irradiated Tungsten
C. Ji , J. Hu , Z. Zhuang , Y. Cui -
Propagation of zonal dislocations: the case of the synchroshear mechanism in Laves phases
J. Guénolé , Z. Xie -
An atomistically informed discrete dislocation dynamics study of prior particles boundaries in Ni superalloys
D. Mistry , P. Guruprasad , A. Ramabathiran
Chaired by: Prof. Peter McHugh (University of Galway) and Dr. Van-Dung Nguyen (University of Liège)
-
Crystal viscoplastic modelling of UO2 : impact of dislocation climbing on the recovery creep behavior
S. El Bez -
Improvement of structural plastic design using CFT column
S. Kim , H. Kwak -
Efficient Surrogate Models for Microstructured Materials based on Interaction-based Material Networks
V. Nguyen , L. Noels -
Localization of Plastic Events and Vibrational Modes in Discrete Dislocation Systems
D. Berta , G. Péterffy , P. Ispánovity -
Ruppeiner Geometry of Strain-Induced Crystallization in Polymers
A. Raza , D. Roy -
Geometrical and Crystal Plasticity Modelling of Effects of Microstructure on Mechanical Properties of Additively Manufactured 316L Stainless Steel Struts
M. Kavousi , P. McHugh , P. McGarry , S. Leen
Organized by: Prof. Anna Pandolfi (Politecnico di Milano), Prof. Michael Ortiz (Politecnico di Milano)
Corresponding Organizer:
Prof.
Anna Pandolfi
(Politecnico di Milano)
Chaired by:
Prof. Anna Pandolfi
(Politecnico di Milano)
-
Keynote
New Results on the Jerky Crack Growth in Elastoplastic Materials
G. Dal Maso , R. Toader -
A Model for the Quasistatic Crack Growth in Elasto-plastic Materials with Hardening: the Antiplane Case
G. Dal Maso , R. Toader -
An Energy Balance-based damage Criterion for an Isotropic Cohesive Zone Model
A. Chrysochoos , L. Daridon , M. Renouf -
A Two-level Model for the Failure of Fiber-reinforced Concrete
R. Yu , E. Poveda , G. Ruiz -
Toughening Effect of Out-of-crack-path Architected Zones
J. Triclot , T. Corre , V. Lazarus , A. Gravouil
Organized by: Mr. Wuyang Zhao (Friedrich-Alexander-Universität Erlangen-Nürnberg), Dr. Christian R. Wick (Friedrich-Alexander-Universität Erlangen-Nürnberg), Dr. Fabrice Detrez (University Gustave Eiffel), Dr. Sebastian Pfaller (Friedrich-Alexander-Universität Erlangen-Nürnberg)
Corresponding Organizer:
Dr.
Wuyang Zhao
(Friedrich-Alexander-Universität Erlangen-Nürnberg)
Chaired by:
Dr. Wuyang Zhao
(Friedrich-Alexander-Universität Erlangen-Nürnberg)
-
Keynote
A nonlocal multi-scale constitutive modeling of reinforced semi-crystalline polymers
F. Meraghni , G. Chatzigeorgiou , S. Satouri -
A Nonlocal Constitutive Framework for Highly Damaged Semi-crystalline Polymers Undergoing Softening
S. Satouri , G. Chatzigeorgiou , F. Meraghni , A. Benaarbia -
A constitutive model for semi-crystalline polymer deformation involving lamellar fragmentation
F. Detrez -
Formulation and Calibration of a Visco-elasto-plastic-damage Constitutive Model for Fibre-reinforced Polymers
I. Rodrigues Lopes , P. Gonçalves , F. Danzi , A. Arteiro , F. Andrade Pires , P. Camanho -
Optimization of the Additive Manufacturing of Short Hemp Fibers Biocomposites
N. Niang , T. Barriere , V. Placet , S. Holopainen
Chaired by: Prof. Eric Feulvarch (Ecole Centrale de Lyon)
-
Crystallographic Texture Evolution
C. Klein , T. Böhlke -
Understanding Crystallographic Effects on Strain Localization in a 6016 Aluminium Alloy under Plane Strain Tension Using Correlative X-ray Lab Tomography
M. Gille , H. Proudhon , J. Oddershede , T. Morgeneyer -
Multiscale plasticity-fracture coupled model of body center cubic metal
Y. Cui -
Crystal Plasticity Simulations of Void Growth
B. Østergaard , G. Winther , K. Nielsen -
A Discrete Cohesive Zone Model for the Modeling of Interface in Adhesively Bonded Laminates and Sandwich Panels
H. Himanshu , A. Ramaswamy -
An Efficient Computational Approach for Critical Plane Type Approaches Dedicated to Fatigue Life Analysis of Structures
F. Fauvin , J. Roux , E. Feulvarch
Chaired by: Prof. W.K Liu (Northwestern University)
-
A Neural Network Interatomic Potential for Crystal Plasticity Mechanisms in Nanoindentation Simulation: The Case of Pure Molybdenum
A. Naghdi Dorabati , F. Pellegrini , E. Kucukbenli , J. Dominguez , D. Massa , E. Kaxiras , S. Papanikolaou -
Efficient Data Handling for Artificial Neural Networks by Physics-Based Rao-Blackwellization for Material Modeling Problems
G. Geuken , P. Kurzeja , J. Mosler -
Modeling Elastoplastic Constitutive Behavior Using Physics-Informed Neural Networks
L. Santos , C. Mejia , D. Roehl -
Using Neural Networks in Hardening Laws
K. Meyer , F. Ekre , R. Jänicke
Organized by: Prof. Ronaldo I. Borja (Stanford University), Prof. WaiChing Sun (Columbia University), Prof. Wei Wu (University of Natural Resources and Life Sciences)
Corresponding Organizer:
Prof.
Ronaldo Borja
(Stanford University)
Chaired by:
Prof. Ronaldo Borja
(Stanford University)
-
Phase-field Modeling of Fractures in Geomaterials
J. Choo , F. Fei -
Phase-field modelling of dynamic strain localization into compaction bands in high-porosity rocks
Y. Wang , R. Borja , W. Wu -
Role of plasticity in induced seismicity and its mitigation
X. Zhao , B. Jha -
Fault Rupture Orientation under Diverse Loading Conditions in SPH Simulations
E. del Castillo , R. Borja -
Fault Friction Under Thermal Pressurization During Large Seismic Slip
A. Stathas , I. Stefanou
Organized by: Prof. Shohei Kajikawa (The University of Electro-Communications), Prof. Takashi Kuboki (The University of Electro-Communications), Prof. Takahiro Makiyama (Institute of Technologists)
Corresponding Organizer:
Dr.
Shohei Kajikawa
(The University of Electro-Communications)
Chaired by:
Dr. Takahiro Makiyama
(Institute of Technologists)
,
Prof. Takashi Kuboki
(The University of Electro-Communications)
-
Application of Material-properties Prediction Method Based on Area Reduction in Drawing to Spinner-straightening Analysis
T. Komatsu , S. Kajikawa , S. Inoue , H. Matsumura , H. Seimiya , T. Kuboki -
Virtual Compression Test by Multi-Scale Approach with Wood Cell Model
S. Kajikawa , S. Oda , T. Kuboki , M. Kondo , M. Abe , M. Seki , T. Miki , E. de Souza Neto -
Prediction of Crack Initiation Around Punch Cutting Edge In Finish Blanking
M. Sasada , K. Imada , S. Fuma , T. Tanaka -
Effects of Combinations of Rotational and Axial Feed on Forged Shape in Mandrel-Less Incremental Forging of Circular Tube
T. Makiyama
Organized by: Dr. Emilio Martinez-Pañeda (Imperial College London), Prof. Christian Niordson (Technical University of Denmark), Prof. Benjamin Klusemann (Leuphana University of Lüneburg)
Corresponding Organizer:
Prof.
Emilio Martinez-Pañeda
(University of Oxford)
Chaired by:
Prof. Christian Niordson
(Technical University of Denmark)
-
Keynote
Emergent fault friction and short-slip in a continuum model of rupture dynamics
A. Arora , A. Acharya , J. Bielak -
The Elastic Threshold for Size-dependent Plasticity and Comparison with Experiments
D. Reddy , S. Sysala -
Modelling of size effects in spherical indentation of a single crystal
M. Ryś , S. Stupkiewicz , H. Petryk -
Towards a Generalised Phase Field Fracture Driving Force Based on the Constitutive Behavior of Materials
Y. Navidtehrani , C. Betegón , E. Martínez Pañeda -
Development of Thermoplastic Constitutive Models for Refractory Ceramics in Wide Temperature Range
L. Fiore , A. Piccolroaz , S. Romero Baivier
Organized by: Dr. Varvara Kouznetsova (Eindhoven University of Technology), Prof. Jörg Schröder (University Duisburg-Essen), Prof. Kenjiro Terada (Tohoku University)
Corresponding Organizer:
Dr.
Varvara Kouznetsova
(Eindhoven University of Technology)
Chaired by:
Prof. Kenjiro Terada
(Tohoku University)
-
Keynote
A Multiscale Phase Field Fracture Approach for Rubber-like Materials
C. Linder , P. Arunachala -
Computational Homogenization of Heterogeneous Porous Solids Saturated by a Dissipative Fluid
R. Liupekevicius , H. van Dommelen , M. Geers , V. Kouznetsova -
Computationally Efficient Modelling of Short Fiber Composites Across Different Length Scales
M. Mirkhalaf , B. Castricum , T. van Beurden , M. Ekh , F. Larsson , M. Fagerström -
Transient Thermo-Mechanically Coupled Analysis for Dissipative Composites Considering Periodicity of Perturbed Temperature
S. Matsubara , S. Nagashima , D. Okumura , K. Terada -
Differential homogenization models for the macroscopic response and field statistics of elasto-viscoplastic polycrystals
P. Ponte Castañeda , S. Das
Organized by: Prof. Hector Gomez (Purdue University), Prof. Thomas J. R. Hughes (University of Texas at Austin), Prof. Laura De Lorenzis (Eidgenössische Technische Hochschule Zürich), Dr. Guillermo Lorenzo (University of Pavia), Prof. Ernst Rank (Technical University of Munich), Prof. Alessandro Reali (University of Pavia)
Corresponding Organizer:
Prof.
Ernst Rank
(Technical University of Munich)
Chaired by:
Dr. Guillermo Lorenzo
(University of A Coruña)
-
Keynote
Phase-Field Modeling of Fracture in Heterogeneous Materials
M. Kästner , A. Hansen-Dörr -
Modelling crack propagation during relaxation of cross-linked polymers
P. Sharma , S. Diebels -
Application of Multiphase-Field Method to Microstructure Evolution Considering Crystal Plasticity
A. Prahs , L. Schöller , T. Kannenberg , D. Schneider , B. Nestler -
Multi-Resolution Phase-Field Formulations Using Higher Order Immersed Boundary Methods
E. Rank , T. Buerchner , L. Hug , P. Kopp , O. Oztoprak , S. Kollmannsberger
Chaired by: Prof. Francisco Chinesta
Organized by: Prof. J.S Chen (University of California), Prof. John Foster (University of Texas), Prof. Mike Hillman (Karagozian & Case), Dr. Pablo Seleson (Oak Ridge National Laboratory)
Corresponding Organizer:
Prof.
J.S Chen
( University of California, San Diego)
Chaired by:
Dr. Mike Hillman
(Karagozian and Case Inc.)
-
A Neural Network-enhanced Reproducing Kernel Particle Method for Modeling Localization and Fracture
J. Chen , J. Baek -
Accurate Absorbing Boundary Conditions in Peridynamics: Part II – Elastic Waves
A. Shojaei , A. Hermann , P. Seleson , T. Rabczuk , S. Silling , C. Cyron -
A 3D Peridynamic Model for Elastoplastic Materials with Isotropic and Kinematic Hardening
U. Galvanetto , A. Pirzadeh , F. Dalla Barba , L. Sanavia , F. Bobaru , M. Zaccariotto -
Numerical Simulation Of The Extrusion Process Of Viscoplastic Materials Using a Radial Point Interpolation Method
D. Rodrigues , J. Belinha , R. Natal Jorge -
Coupled multiphysics large deformation problems using MPM
A. Larese , V. Singer , L. Moreno , A. Boerst , N. Crescenzio , R. Wuechner -
A novel Arbitrary Lagrangian Eulerian system of conservation laws for fast solid dynsmics
A. Gil , C. Lee , J. Bonet
Organized by: Prof. Francisco J. Montáns (Universidad Politécnica de Madrid), Prof. Luis Barrales-Mora (Georgia Institute of Technology), Prof. Francisco Chinesta (ENSAM ParisTech), Dr. Luis Saucedo-Mora (Universidad Politécnica de Madrid)
Corresponding Organizer:
Prof.
Francisco Javier Montáns Leal
(Universidad Politécnica de Madrid)
Chaired by:
Prof. Francisco Javier Montáns Leal
(Universidad Politécnica de Madrid)
,
Prof. Francisco Chinesta
(ESI GROUP Chair, ENSAM ParisTech)
-
Finite Strain and Instability Analysis of Functionally-Graded Thin Auxetic Materials
S. Pamulaparthi Venkata , M. Destrade , V. Balbi , D. Accoto , S. Coppieters , G. Zurlo -
Topological Classification and Optimization of Randomized Metamaterial Architectures
L. Irastorza-Valera , F. Chinesta , L. Saucedo-Mora -
Investigating the Applicability of Beam Elements in Two-scale FE2 Computational Homogenization of Truss-based Mechanical Metamaterials
H. Danesh , T. Brepols , S. Reese -
Optimality processing conditions and forming induced properties
F. Ebrahimian , S. Rodriguez , D. Di Lorenzo , F. Chinesta -
Modelling and simulation of 3D microstructure evolution in selective laser melting by means of a parallelized cellular automaton model
A. Singh , L. Barrales-Mora -
Comparing machine learning and analytical models in nonlinear elasticity
A. Alibakhshi , J. Benítez , L. Saucedo Mora , F. Javier Montáns
Chaired by: Prof. Ramon Codina (CIMNE/UPC) and Mr. Sacha Wattel (EPFL)
-
An improved material point method for frictional contact problems involving phase field fracture
E. Kakouris -
A Nodal-Based Finite Element Implementation of Plasticity and Damage Models Using a Stress-Displacement Formulation
R. Codina -
Computational Homogenization With Tensor-train-based Preconditioners
L. Risthaus , M. Schneider -
A Mixed Approximation for Nonlinear Elasticity Using Finite Element Exterior Calculus
J. Nagaraja , D. Roy -
A structure-preserving integrator for incompressible finite elastodynamics based on a grad-div stabilized mixed formulation
J. Guan , H. Yuan , J. Liu -
The D-Refinement Method for the Efficient Simulation of Locally Non-Linear Problems
S. Wattel , J. Garcia-Suarez , J. Molinari
Organized by: Prof. Markus Hütter (Eindhoven University of Technology), Dr. Bob Svendsen (RWTH Aachen University)
Corresponding Organizer:
Prof.
Markus Hütter
(Eindhoven University of Technology)
Chaired by:
Prof. Markus Hütter
(Eindhoven University of Technology)
,
Dr. Bob Svendsen
(RWTH Aachen University)
-
Thermodynamics of dislocation plasticity
V. Berdichevsky -
On the dynamics of curved dislocation ensembles
I. Groma , P. Ispánovity , T. Hochrainer -
Kinetic Closure of Continuum Dislocation Dynamics from Discrete Dislocation Data
B. Weger , T. Hochrainer -
Statistical underpinning of 3d continuum dislocation dynamics
A. El-Azab , J. Anderson -
Data-mining of Dislocation Microstructures
S. Sandfeld
Chaired by: Prof. Suarez Guerrero (Institución Universitaria Pascual Bravo) and Prof. Atsushi Sakuma(Kyoto Institute of Technology)
-
Optimal Control of Worm locomotion
A. Bijalwan , J. Munoz -
Evaluation of the Impact-induced Brain Injury through Numerical Smulation using Elastoplastic Constitutive Model
K. Shimomura , A. Sakuma , Y. Zhang , M. Terai , H. Miyaki , R. Suzuki -
Comparison of Mechanical Behavior of Bioresorbable Material for Additive Manufactirung of Vascular Replacements and its Gore-Tex Counterparts
L. Horný , Z. Sobotka , H. Chlup , K. Mendová , Z. Petřivý , M. Kohan , T. Balint , M. Schnitzer -
MR Damper for Artificial Knee Joint: Concept Design and Performance Assessment
S. Seid -
A robust and efficient material model for shape memory alloys with medical application
C. Erdogan , T. Bode , P. Junker
Organized by: Prof. Anna Pandolfi (Politecnico di Milano), Prof. Michael Ortiz (Politecnico di Milano)
Corresponding Organizer:
Prof.
Anna Pandolfi
(Politecnico di Milano)
Chaired by:
Prof. Kerstin Weinberg
(Universität Siegen)
-
Keynote
Anisotropic Phase-Field Modeling of In-Plane Ductile Fracture in Paperboard
A. Marengo , U. Perego -
A Fracture Multiscale Model for Peridynamic enrichment within the Partition of Unity Method
P. Diehl -
Extracting interfacial toughness for crack pathpredictions using graphs
S. Tsopanids , S. Osovski -
Eigenerosion: Theoretical Concepts and Practical Aapplications
M. De Bellis , M. Ortiz , A. Pandolfi
Organized by: Mr. Wuyang Zhao (Friedrich-Alexander-Universität Erlangen-Nürnberg), Dr. Christian R. Wick (Friedrich-Alexander-Universität Erlangen-Nürnberg), Dr. Fabrice Detrez (University Gustave Eiffel), Dr. Sebastian Pfaller (Friedrich-Alexander-Universität Erlangen-Nürnberg)
Corresponding Organizer:
Dr.
Wuyang Zhao
(Friedrich-Alexander-Universität Erlangen-Nürnberg)
Chaired by:
Dr. Fabrice Detrez
(University Gustave Eiffel)
-
Keynote
3D Modelling of plasticity and failure in glassy polymers
R. Estevez -
Microstructure Generation and Full-field Multi-scale Analyses for Short Fibre Reinforced Thermoplastics
F. Praud , K. Schneider , G. Chatzigeorgiou , F. Meraghni -
Modelling mechanochemical reactions in epoxy resins using hybrid QM/MM/MD approaches.
A. Suncana-Smith , C. Wick -
Interphase properties of polymer nanocomposites and their role in material failure
S. Pfaller , M. Ries -
Fracture of Glassy Thermoplastics Based on Multiscale Simulations Across Molecular and Continuum Scales
W. Zhao , S. Pfaller
Chaired by: Prof. Miguel Cervera (CIMNE/UPC)
-
A Modified Fully Implicit Cutting Plane Method Based Stress Integration Algorithm and its Verification Using Drucker Prager Model
M. Dharmasiri , M. Lalith , K. Fujita , T. Ichimura , M. Hori -
An Implicit Stress Update Algorithm Based on Primal-dual Interior Point Method for GTN Model
Y. Shintaku , T. Inaoka , K. Terada -
Objectivity in the Finite Element Analysis of Quasi-Brittle Failure Via Adaptive Mesh and Formulation Refinement
G. Barbat , M. Cervera , C. Moreira , H. Venghaus , M. Chiumenti -
Numerical Experiments to Assess the Behavior of Finite Elements with Embedded Strong Discontinuities
D. Cavalcanti , C. Mejia , D. Roehl , L. Martha -
A View on Validating Crack Propagation Prediction with Shape Optimization by Means of a Phase-Field Model
C. Kandekar , T. Suchan , W. Weber , K. Welker -
Physics-Informed Neural Network for Forming Limit Curves Prediction
B. Erice , D. Araya , J. Mendiguren , J. Gomez
Organized by: Prof. Herbert Mang (Vienna University of Technology), Prof. Yeong-Bin Yang (Chongqing University)
Chaired by:
Prof. Herbert Mang
(Vienna University of Technology)
,
Prof. Yeong-Bin Yang
(Chongqing University)
-
Keynote
Differential Geometric Split of the Strain Energy of Proportionally Loaded Structures
M. Aminbaghai , J. Kalliauer , A. Wagner , H. Mang -
An Enhanced Vehicle Model Concerning Pitching Responses for VSM
J. Yang , C. Wang -
Internal Instability of Thin-Walled Girder Bridges under Harmonic Moving Loads
Y. Yang , K. Shi , X. Mo -
Semi-analytical modelling of mode jumping phenomena in pressurized fuselage panels
A. Alhajahmad , C. Mittelstedt
Organized by: Prof. Ronaldo I. Borja (Stanford University), Prof. WaiChing Sun (Columbia University), Prof. Wei Wu (University of Natural Resources and Life Sciences)
Corresponding Organizer:
Prof.
Ronaldo Borja
(Stanford University)
Chaired by:
Prof. Wei Wu
(University of Natural Resources and Life Sciences, Vienna)
-
Thermo-hydro-mechanical Coupled Material Point Method for Simulating Landslide
C. Zhou , Z. Zhan , C. Liu -
Simulating Earthquake-induced Large Deformation Using Material Point Method
Z. LYU , G. WANG -
Multiscale modeling of wave propagation in saturated granular material
W. Liang , Z. Yin , J. Zhao , K. Soga -
Fully resolved CFD-DEM modeling of fluid-particle interactions involving irregularly shaped particles
J. Zhao , Z. Lai , S. Zhao -
A Constitutive Model (CASME) for Internal Erosion and Its Applications
G. Ma , V. Nguyen , G. Nguyen , H. Bui -
Effect of Pore Habits on Mechanical Behavior of Methane Hydrate Bearing Sediments based on a Comprehensively Calibrated DEM Model
P. Wang , C. Xu , X. Gao , Z. Yin
Chaired by: Prof. Ekkehard Ramm ( University of Stuttgart) and Mr. Henning Venghaus (CIMNE/UPC)
-
Effect of JCO-E Steel Pipe Manufacturing Process on the Mechanical Properties and Structural Integrity of Offshore Pipelines
A. Stamou , S. Karamanos -
Modular FE-Modeling of Heavy Plate Rolling Processes using Customized Model Reduction Approaches
A. Nemetz , E. Parteder , P. Reimer , T. Kaltenbrunner , B. Heise , J. Lekue , T. Gross , S. Falkner , R. Egger , K. Zeman -
Modeling of the Compaction Shot-Peening Process of an Al Multiparticulate Coating
L. Eschard , R. Kubler , L. Barrallier , F. Deloye , L. Gani -
Improved Sheet Metal Forming Simulations using higher Order Shell Elements
T. Willmann , M. Schilling , E. Ramm , M. Bischoff -
Modelling of wet cutting processes for turning simulations
B. Bock-Marbach , J. Kuhnert -
A Comprehensive Framework for Accurate and Efficient Simulation of Friction Stir Welding Processes
H. Venghaus , M. Chiumenti , J. Baiges , D. Juhre , N. Dialami , A. Segatori
Organized by: Dr. Emilio Martinez-Pañeda (Imperial College London), Prof. Christian Niordson (Technical University of Denmark), Prof. Benjamin Klusemann (Leuphana University of Lüneburg)
Corresponding Organizer:
Prof.
Emilio Martinez-Pañeda
(University of Oxford)
Chaired by:
Prof. Christian Niordson
(Technical University of Denmark)
-
Keynote
Discrete Dislocation Plasticity Modelling of - Type Irradiation Loops in Zirconium
R. Kumar , D. Hortelano-Roig , E. Tarleton , D. Balint -
FFT-based phase-field modeling for fatigue short cracks in polycrystals
S. Lucarini , F. Dunne , E. Martínez-Pañeda -
Incipient plasticity in nanoindentation modelled by discrete dislocation plasticity
H. Yu -
Coupling hydrogen effects to plastic degradation in phase field fracture modelling
A. Díaz , E. Martínez-Pañeda , I. Cuesta , L. Peral , J. Alegre -
Propagation of Diffusion-Assisted Intergranular Cracks in Polycrystals
K. Auth , J. Brouzoulis , M. Ekh
Organized by: Dr. Varvara Kouznetsova (Eindhoven University of Technology), Prof. Jörg Schröder (University Duisburg-Essen), Prof. Kenjiro Terada (Tohoku University)
Corresponding Organizer:
Dr.
Varvara Kouznetsova
(Eindhoven University of Technology)
Chaired by:
Prof. Dennis Kochmann
(ETH Zurich)
-
Keynote
Dislocation-crystal Plasticity Simulation for Investigation of Grain Size Dependency in Dual Phase Steel
M. Muramatsu , M. Suzuki , K. Shizawa -
Computational and analytical scale-bridging methods to model creep in lamellar metals
A. Dyck , L. Beifuß , T. Böhlke -
Towards a two-scale Analysis of Residual Stresses in 3D
S. Hellebrand , D. Brands , J. Schröder -
Network approach for the analysis of the plastic deformation of ductile solids containing porosities
J. Hund , V. Kouznetsova , L. Alessandretti , T. Andriollo -
Strain gradient plasticity based on saturating internal variables
M. Abatour , S. Forest
Organized by: Prof. Hector Gomez (Purdue University), Prof. Thomas J. R. Hughes (University of Texas at Austin), Prof. Laura De Lorenzis (Eidgenössische Technische Hochschule Zürich), Dr. Guillermo Lorenzo (University of Pavia), Prof. Ernst Rank (Technical University of Munich), Prof. Alessandro Reali (University of Pavia)
Corresponding Organizer:
Prof.
Ernst Rank
(Technical University of Munich)
Chaired by:
Prof. Ernst Rank
(Technical University of Munich)
-
Biomechanical interplay between benign prostatic hyperplasia and prostate cancer
G. Lorenzo , T. Hughes , T. Yankeelov , H. Gomez , A. Reali -
Patient-specific optimization problems for a tumor growth model with angiogenesis
A. Agosti , A. Giotta Lucifero , S. Luzzi -
Computational modelling of cell motility within degradable hydrogel scaffolds
P. Gaziano , M. Marino -
A Phase-Field Approach for an Effective Description of Electrochemical Machining
J. Waimann , S. Reese , C. Niordson
Thu, 07/09/2023
08:15 - 08:45
08:15 - 08:45
Organized by: Prof. J.S Chen (University of California), Prof. John Foster (University of Texas), Prof. Mike Hillman (Karagozian & Case), Dr. Pablo Seleson (Oak Ridge National Laboratory)
Corresponding Organizer:
Prof.
J.S Chen
( University of California, San Diego)
Chaired by:
Prof. J.S Chen
( University of California, San Diego)
-
Convolution Hierarchical Deep Learning Neural Network (C-HiDeNN) for Plasticity
W. Liu , J. Guo , S. Mojumder , D. Qian -
Accurate Absorbing Boundary Conditions In Peridynamics: Part I – Scalar Waves
A. Hermann , A. Shojaei , P. Seleson , S. Silling , C. Cyron -
How Do We Chose The Parameters In The RK And MLS Approximations?
M. Hillman , D. Wilmes , J. Magallanes -
A multi-adaptive framework to enhance the computational performance of bond-based peridynamic models
G. Ongaro , A. Shojaei , F. Mossaiby , A. Hermann , C. Cyron , P. Trovalusci -
Buildability Modeling of 3D-Printed Concrete: A Peridynamic Simulation
J. Zhu , X. Ren , M. Cervera -
Implementation of a Bounding Surface Elasto-plastic Model for Unsaturated Porous Media Using a Meshfree Method
A. Khoshghalb , O. Ghaffaripour , G. Esgandani , B. Shahbodagh
Organized by: Prof. Francisco J. Montáns (Universidad Politécnica de Madrid), Prof. Luis Barrales-Mora (Georgia Institute of Technology), Prof. Francisco Chinesta (ENSAM ParisTech), Dr. Luis Saucedo-Mora (Universidad Politécnica de Madrid)
Corresponding Organizer:
Prof.
Francisco Javier Montáns Leal
(Universidad Politécnica de Madrid)
Chaired by:
Dr. Luis Saucedo Mora
(Universidad Politécnica de Madrid)
,
Prof. Francisco Javier Montáns Leal
(Universidad Politécnica de Madrid)
-
Model Order Reduced and Self-defined Topology Optimisation Methodology for Vibration Suppression Using Metamaterials
K. Bhat , I. Martinez Teres , L. Saucedo Mora , F. Javier Montans , J. Garcia-Martinez -
An Efficient Procedure For Multiscale Structural Simulation Of Metamaterials
F. San Millan , J. Garcia-Martinez , K. BHAT , L. Saucedo-Mora , I. Martinez Teres , F. Montans -
Robust topology optimisation of lattice structures with spatially correlated imperfections
I. Ben-Yelun , A. Yuksel , F. Cirak -
From Micro to Macro: A Unified Approach for Modeling the Mechanical Response for Functionally Graded Metamaterials
V. Yanes Francisco , A. Ramirez Torres , M. Sanz Gomez , F. Montans Leal -
Topological Optimization For Components Of Orthotropic Materials With Dirichlet And Neumann Boundary Conditions
L. Saucedo Mora , I. Ben-Yelun , M. Sanz , F. Montans
Chaired by: Prof. Xavier Oliver (UPC/CIMNE)
-
Novel global iterative schemes for large rotation finite element analysis of beams and shells with nonlinear materials
D. Magisano , A. Corrado , G. Garcea -
Generalized fiber model for the elastoplastic analysis of beams with normal stress-shear stresses interaction
D. Magisano , G. Garcea -
Energy Based Criteria to Assess the Fire Resistance of Restrained Steel Columns
P. Dias Simão , J. Correia Rodrigues -
Viscoplastic Modelling and Yield Criterion for ETFE Membranes
L. Seixas , M. Penasa , F. Bosi -
A Framework For Designing Shape Memory Alloy Smart Devices
C. Garrido , D. Barba -
Micromechanics of Indentation of Metallic Honeycombs
B. Karthikeyan , N. K. Sundaram
Organized by: Prof. Markus Hütter (Eindhoven University of Technology), Dr. Bob Svendsen (RWTH Aachen University)
Corresponding Organizer:
Prof.
Markus Hütter
(Eindhoven University of Technology)
Chaired by:
Prof. Markus Hütter
(Eindhoven University of Technology)
,
Dr. Bob Svendsen
(RWTH Aachen University)
-
Microscopic View on Plasticity in Polymer Glasses
G. Vogiatzis , L. van Breemen , M. Hütter , D. Theodorou -
The Energetics of Disconnections in Grain Boundaries
H. Joshi , I. Chesser , B. Runnels , N. Admal -
Pseudo-Continuum Characterization of Discrete Kinematic Results from Experiment and Simulation
B. Svendsen -
Crystal Defects Description: Towards a Discrete-to-Continuum Crossover
H. Kharouji , L. Dezerald , P. Hirel , P. Corider , P. Carrez , V. Taupin , J. Guénolé -
Coupling Discrete Dislocation Dynamics and Phase Field for First Strain Gradient Materials
M. Budnitzki , R. Strobl , S. Sandfeld
Chaired by: Ms. Ana Lisac ( University of Zagreb)
-
A variational approach to the modeling of multi-species biofilm growth
M. Soleimani , F. Klempt , P. Junker -
Numerical Study of an Arterial Adaptation to the Implementation of a Simplified Stent
A. Lisac , L. Virag , I. Karšaj -
Local Micromorphic Non-affine Anisotropy Applied to Biological Tissue
S. Skatulla , C. Sansour , G. Limbert
Organized by: Prof. Daniel Juhre (Otto von Guericke University Magdeburg), Konstantin Naumenko (Otto von Guericke University Magdeburg)
Corresponding Organizer:
Prof.
Daniel Juhre
(Institute of Mechanics / Otto von Guericke University Magdeburg)
Chaired by:
Prof. Daniel Juhre
(Institute of Mechanics / Otto von Guericke University Magdeburg)
,
Prof. Konstantin Naumenko
(Otto-von-Guericke-University Magdeburg)
-
A Gradient-Extended Anisotropic Damage Model for Large Deformations
T. Brepols , T. van der Velden , H. Holthusen , S. Reese -
Coupling of Peridynamics with Finite Element Analysis - A Case Study
A. Pernatii , U. Gabbert , C. Willberg , J. Hesse -
Sensor-Data-Driven Crack Path Estimation Using Coupled Inverse Finite Element Method with Peridynamics
A. Kefal , E. Oterkus -
Rate- and Temperature-dependent Fracture Phenomena: Experimental Investigation and Phase-field Modelling
F. Dammaß , M. Kästner -
On the modelling of viscoelastic properties of filled and unfilled rubber blends
D. Juhre , J. Voges
Organized by: Prof. Stefanie Reese (RWTH Aachen University), Prof. Laurent Stainier (Centrale Nantes), Dr. Adrien Leygue (Centrale Nantes), Prof. Michael Ortiz (California Institute of Technology)
Corresponding Organizer:
Prof.
Stefanie Reese
(RWTH Aachen University)
Chaired by:
Prof. Stefanie Reese
(RWTH Aachen University)
-
Comparison of Different Approaches Considering Physical Properties in ANN Material Modeling for Plasticity
P. Weber , W. Wagner , S. Freitag -
Reduced-Order Polycrystalline Texture Representation
J. Jin , P. Breitkopf , L. Cauvin , A. Leclerc , B. Li , M. Mayer Grigoleto , B. Raghavan -
On the use of PGD-Approximation for Prediction of Evolving Plasticity in Wheel-Rail Contact
C. Ansin , F. Larsson , R. Larsson , M. Ekh -
A Data-Driven Framework for Multiscale Material Analysis
E. Prume , C. Gierden , S. Reese -
Data-driven mechanics for materials with microstructure
K. Weinberg
Chaired by: Prof. Yuichi Shintaku (University of Tsukuba)
-
Fracture Modelling in Pre-flawed Marble Specimens during Uniaxial compression with 3D DEM
D. Tomporowski , J. Tejchman -
A Cohesive Traction Embedded Constitutive law Combined With Shear-Induced Damage for Cyclic Loading under Various Stress States
R. Tao , Y. Shintaku , K. Terada -
Numerical Predictions for an Anisotropic Material Containing Ellipsoidal Voids and Exhibiting Tension-compression Asymmetry.
S. Hashem-Sharifi -
Fast Computations of Peridynamic Models for Ductile Failure
F. Bobaru , F. Mousavi , S. Jafarzadeh -
Modeling low cycle fatigue and considering the influence of forming-induced pre-damage
K. Langenfeld , P. Kurzeja , J. Mosler -
On optimization of heterogeneous materials for resistance to bulk fracture
S. Singh , L. Pflug , M. Stingl
Organized by: Prof. Francisco Chinesta (ESI GROUP Chair, ENSAM ParisTech), Prof. Elias Cueto (Universidad de Zaragoza), Prof. Benjamin Klusemann (Leuphana University of Lüneburg), Prof. Francisco J. Montáns (Universidad Politécnica de Madrid)
Corresponding Organizer:
Prof.
Elias Cueto
(Universidad de Zaragoza)
Chaired by:
Prof. Benjamin Klusemann
(Leuphana University of Lüneburg)
,
Prof. Francisco Javier Montáns Leal
(Universidad Politécnica de Madrid)
-
Machine learning enhanced shell element formulation for the mechanical response of thin to thick structures
A. Pasquale , M. Ziane , A. Ammar , F. Chinesta -
A time multiscale based data-driven approach in cyclic elasto-plasticity
S. Rodriguez , A. Pasquale , K. Nguyen , A. Ammar , E. Cueto , F. Chinesta -
Learning data-driven reduced inelastic models of spot-welded patches
F. Daim , D. Di Lorenzo , Y. Tourbier , A. Ammar , E. Cueto , F. Chinesta -
Physically-inspired kernels and data augmentation for nonlinear model order reduction
P. Díez , S. Zlotnik , A. Muixí , A. García Gonzalez
Organized by: Prof. Ronaldo I. Borja (Stanford University), Prof. WaiChing Sun (Columbia University), Prof. Wei Wu (University of Natural Resources and Life Sciences)
Corresponding Organizer:
Prof.
Ronaldo Borja
(Stanford University)
Chaired by:
Prof. WaiChing Sun
(Columbia University)
-
High-dimensional symbolic regression via neural feature polynomials for interpretable machine learning plasticity
B. Bahmani , H. Suh , W. Sun -
Machine Learning Surrogate Modeling of Geomaterials for Finite Element Analysis
S. Semnani -
Interpretable Data-Driven Constitutive Modelling of Soils with Sparse Data
P. Zhang , Z. Yin , B. Sheil -
A Physics-informed Deep Learning-FEM Coupling Framework for Small-Strain Boundary Value Problem
N. Zhang , Z. Yin , Y. Jin , K. Li -
Limit and shear strength reduction analyses in geotechnical stability
S. Sysala
Chaired by: Mr. Dhairaysheel Patil (Alloyed) and Dr. In Yong Moon (Korea Institute of Industrial Technology)
-
FE-Assisted Generative Model for Dynamic Recrystalization Behavior during Hot Forging
I. Moon , H. Jeong , K. Jung , S. Kang -
Modeling of Rough Contact Interfaces with Trapped Compressive Liquid Pockets
P. Alavi , L. Rocchi , J. Richard , C. Leppin , G. Anciaux , J. Molinari -
A Reduced Order Based Metamodel for Parametric Computational Studies of Local Post Weld Heat Treatment
L. Cimatti Lucarelli , N. Blal , A. Gravouil , A. Platzer , D. Iampietro , T. Potin -
Multiscale Simulation Chain for the Simulation and Optimization of Components Made of Long Fiber Reinforced Polymers
J. Köbler , M. Kabel , H. Andrä , F. Welschinger , A. Kech , M. Ersch , R. Schirrmacher , S. Mönnich , J. Wolters , N. Mentges , F. Di Batista , C. Hopmann , F. Fritzen -
Improving the laser powder bed fusion processability of copper alloys and assessing the printability of complex structures along with thermal properties
D. Patil , E. Alabort -
Density prediction model of superconducting MgB2 wire during multi-pass drawing processes
Y. Oh , H. Lee , K. Chung , S. Kang
Organized by: Dr. Emilio Martinez-Pañeda (Imperial College London), Prof. Christian Niordson (Technical University of Denmark), Prof. Benjamin Klusemann (Leuphana University of Lüneburg)
Corresponding Organizer:
Prof.
Emilio Martinez-Pañeda
(University of Oxford)
Chaired by:
Prof. Emilio Martinez-Pañeda
(University of Oxford)
-
Keynote
Enriched Model for Interfaces Exhibiting Serrated Deformation and Failure
V. Kouznetsova , L. Liu , F. Maresca , J. Hoefnagels , M. Geers -
Phase Field Fracture Modelling of Composite Materials
W. Tan , K. Au-Yeung , A. Quintanas Corominas , E. Martinez-Pañeda -
Exploring Phase Field Fractures in 3D Printed Fibre Reinforced Composites
G. Pissas , S. Triantafyllou -
A Consistent Phase-Field Formulation for Ionic Transport and Reactions within Electrolyte-Filled Fractures
T. Hageman , E. Martínez-Pañeda
Organized by: Dr. Varvara Kouznetsova (Eindhoven University of Technology), Prof. Jörg Schröder (University Duisburg-Essen), Prof. Kenjiro Terada (Tohoku University)
Corresponding Organizer:
Dr.
Varvara Kouznetsova
(Eindhoven University of Technology)
Chaired by:
Prof. Jörg Schröder
(University Duisburg-Essen)
-
Keynote
Domain Microstructure Evolution in Ferroelectric Ceramics by a First-Principles-Informed, Thermalized Phase Field
D. Kochmann , R. Indergand -
Particle-Based Approach to the Eulerian Distortion Field
M. Hütter , M. Pavelka -
Error-driven hierarchical modelling of composite structures
N. Feld , M. Fergoug , A. Parret-Fréaud , B. Marchand , S. Forest -
Enhanced plastic response in new Voronoi-type porous materials obtained by nonlinear elasticity
Z. Hooshmand-Ahoor , G. Tarantino , H. Luo , K. Danas -
Peristaltic-driven flows induced in piezoelectric porous structures; homogenization approach
E. Rohan , V. Lukeš
Organized by: Prof. Giovanna Xotta (University of Padova), Prof. Ignacio Carol (Technical University of Catalonia)
Corresponding Organizer:
Dr.
Giovanna Xotta
Chaired by:
Dr. Ignacio Carol
(UPC)
,
Dr. Giovanna Xotta
-
Weak coupling between macroscopic and mesoscopic approaches to describe concrete cracking
I. Bitar , C. Pélissou , S. Dray , F. Perales -
Fracture Analysis of Brittle Materials with Residual Stress Field
S. Hirobe , K. Oguni -
A continuous Approach for Modelling Fracture Formation and its Application to Gas Fracturing of Callovo-Oxfordian Claystone
J. Rabone , R. Rodrigues de Amorim , C. La Borderie , O. Maurel , S. Dal Pont , M. Briffaut , M. VU , R. De La Vaissière -
New Results in Numerical Modelling of Two-phase Flow in Fractured Rock Masses Using Zero-thickness Interface Elements
L. Barandiarán , J. Liaudat , C. López , D. Garolera , I. Carol -
Non-local poromechanical coupling based on multi phase-fields
M. Tricoche , P. Morenon , A. Millard , A. Sellier , A. Papon , E. Grimal , R. Tajetti , P. Kolmayer
Organized by: Jan Machacek (Technische Universität Darmstadt)
Corresponding Organizer:
Dr.
Jan Machacek
(Technische Universität Darmstadt)
Chaired by:
Dr. Jan Machacek
(Technische Universität Darmstadt)
-
Hypoplastic model for cyclic loading with inner stiffness multiplier
M. Alipour , W. Wu -
A Hypoplastic Model Considering Particle Breakage for Monotonic and Cyclic Loading of Granular Sand
H. Qian , W. Wu , C. Xu , X. Du -
Numerical Investigation of Infinite Slopes under Bi-directional Cyclic Loading
A. Csuka , S. Chrisopoulos , R. Cudmani -
Verification and Practical Use of the High Cycle Accumulation Model for Sand
P. Tantivangphaisal , D. Taborda , S. Kontoe -
Challenges in the Calibration of Finite Element Models for the Analysis of Masonry Structures: A Comparative Study
A. Ghezelbash , F. Messali , J. Rots
Organized by: Dr. Brubeck L. Freeman (Cardiff University), Prof. Iulia C. Mihai (Cardiff University), Prof. Tony D. Jefferson (Cardiff University)
Corresponding Organizer:
Dr.
Brubeck Freeman
(Cardiff University)
Chaired by:
Dr. Brubeck Freeman
(Cardiff University)
-
Keynote
Multiscale homogenization approaches for the optimization of plant-based building materials
A. Abou Chakra , G. Huang , J. Absi , S. Geoffroy -
The Application of a Coupled Finite Element Model to Simulate Healing in a Range Of Autonomic and Enhanced Autogenic Self- Healing Systems
A. Jefferson , B. Freeman -
An Unfitted Finite Element Model for Simulating Transport Processes in Vascular Self-Healing Cementitious Materials
B. Freeman , A. Jefferson
Chaired by: Prof. Tadeusz Burczyński (Institute of Fundamental Technological) and Jörg Schröder (University Duisburg-Essen)
-
Multiscale Modeling of Concrete with Nano-Ingredients
M. Poński , I. Pokorska-Służalec , T. Burczyński -
Modelling the Effects of Crack Sealing on the Hydromechanical Behavior of Claystone
S. Abou Chakra , B. Bary , E. Lemarchand , S. Granet , J. Talandier -
Multi-scale Analysis of Hardening Concrete Under Vibration
S. El Yassini -
A Hybrid‑Mixed FEM to describe the Phenomenological Processes of Crack Formation and Fibre Pullout in UHPFRC
L. Gietz -
Phenomenological material model for failure in reinforced high performance concretes at low cycle fatigue
D. Brands , M. Pise , G. Gebuhr , S. Anders , J. Schröder -
Effect of Confining Stress on the Fracture Mode in Micromechanical Modeling of the Brazilian Splitting Tests
M. Sarem , N. Deresse , J. Ulloa , E. Verstrynge , S. François
Organized by: Prof. Javier Segurado (Technical University of Madrid), Prof. Jaime Marian (INEGI), Prof. Samuel Forest (Armines Mines ParisTech)
Corresponding Organizer:
Prof.
Javier Segurado Escudero
(Universidad Politécnica de Madrid / IMDEA Materials Institute)
Chaired by:
Prof. Javier Segurado Escudero
(Universidad Politécnica de Madrid / IMDEA Materials Institute)
-
Keynote
Modeling the development of slip localizations in crystal plasticity
I. Beyerlein -
Initial Yield Surface for Hcp Voided Crystals - Micromechanical Model and Numerical Validation
K. Kowalczyk-Gajewska , S. Virupakshi , K. Frydrych , G. Vadillo -
Statistics of local stresses in polycrystals
M. Krause , F. Gehrig , D. Wicht , T. Böhlke -
Analysis of Deformation Mechanisms of P91 Martensitic Steel Using Micro-pillar Tests and Crystal Plasticity Modelling
S. Isavand , P. Sreenivasa Rao , A. Bondarev , S. B Leen , N. P O’Dowd -
Dynamic Shock-Driven Dislocation Dipole Nucleations in a Peierls Model
Y. Pellegrini , M. Josien
Chaired by: Prof. Eduardo de Souza Neto(Swansea University)
-
Fatigue Behaviour of Glass-fiber-reinforced Polymers: Numerical Versus Experimental
B. Alcayde , A. Cornejo , S. Jiménez , L. Barbu , M. Merzkirch , E. Marklund -
Multiscale analysis of fracture in short glass fiber reinforced polymers throught phase field
A. Fajardo Lacave , F. Welschinger , L. De Lorenzis -
Modelling of elastoplasticity and fracturing of polycrystalline metals using microplane approach
I. Mundó , F. C. Caner , A. M. Mateo -
A Computational Strategy to Enable the Constitutive Characterisation of Amorphous Polymeric Blends PC/ABS
F. Pala Beirão Macedo , I. André Rodrigues Lopes , F. Manuel Andrade Pires -
On Modelling The Loading Rate Dependency Of Salt Rock Fracturing
A. Escanellas , J. Liaudat , I. Carol -
Microscopic damage model via a multi-scale defect dynamics.
I. Ryu
Organized by: Prof. Alan Needleman (Texas A&M University), Prof. Ahmed Benallal (ENS Paris Saclay/CNRS), Amine Benzerga (Texas A&M University), Dr. David Morin (Norwegian University of Science and Technology)
Corresponding Organizer:
Prof.
A. Needleman
(Texas A&M University)
Chaired by:
Prof. A. Needleman
(Texas A&M University)
-
Application of a Theory of Unhomogeneous Yielding to Ductile Failure Analysis
R. Vigneshwaran , A. Benzerga -
New Insights into the Role of Porous Microstructure on Dynamic Shear Localization
A. Vishnu , M. Marvi-Mashhadi , J. Nieto-Fuentes , J. Rodríguez-Martínez -
Inferring Crack Path and Crack Growth Resistance using Evolving Graphs
A. Molkeri , A. Srivastava -
A Material Model for Nonlinear Anisotropic Viscoelastic Behavior of Plant Tissues of Stephania japonica
D. Macek , H. Holthusen , A. Rjosk , S. Ritzert , S. Reese -
Anisotropic Stress State Dependent Fracture Properties of BCC Steels at Room and Cryogenic Temperatures
F. Shen , S. Münstermann , J. Lian
Chaired by: Prof. Dr. Lucia Barbu (CIMNE/UPC)
-
Deep learning phase-field model for brittle fractures
J. Ghaffari Motlagh , P. Jimack , R. de Borst -
Phase Field Modeling of Corrosion-Induced Cracking in Reinforced Concrete Structures
J. Abou Eid -
Modeling Fatigue Fracture with Phase Field, Adaptive Mesh Refinement and Cycle Jumps
A. Jaccon , B. Prabel , G. Molnár , J. Bluthé , A. Gravouil -
On the use of a fourth-order degradation tensor for fracture phase-field models
C. Esteves , J. Boldrini , M. Bittencourt -
Assessment of phase-field fracture and crystal plasticity simulations of polycrystals
J. Scherer , M. Ramesh , S. Gorske , A. Marboeuf , B. Bourdin , K. Faber , P. Voorhees , K. Bhatthacharya
Chaired by: Prof. Orlando Soto (Applied Simulations Inc.) and Dr. Ali Mezher (CEA Saclay)
-
Application of the Adaptive Static Condensation Method on the Vercors Mock-Up
A. Mezher , L. Jason , G. Folzan , L. Davenne -
Computational Strategy for Data-Driven Nonlinear FEA with Hardware Acceleration
H. Chung , H. Kwak -
Finite Element Simulation of Projectile Shrinking
T. Collas , F. Lebon , I. Rosu , C. Ningre -
Numerical Modeling of Blast Loaded Concrete Buildings Using Massively-Parallel Coupled CFD-CSD Techniques
O. Soto , M. Giltrud , J. Baum , R. Lohner , F. Togashi -
Study on interface morphology and mechanical mechanism of copper-aluminum composite rolling
S. Tang , B. Gao , G. Zhang -
Domain decomposition methods for the phase field fracture staggered solver
C. Bovet , J. Rannou
Organized by: Prof. Michel Raous (Laboratoire de Mécanique et d’Acoustique), Prof. Peter Wriggers (Leibniz University of Hannover), Dr. Michael Puso (Lawrence Livermore Nat'l Lab), Prof. Giorgio Zavarise (Politecnico di Torino)
Corresponding Organizer:
Prof.
Michel Raous
(Laboratoire de Mécanique et d'Acoustique)
Chaired by:
Prof. Michel Raous
(Laboratoire de Mécanique et d'Acoustique)
,
Dr. Michael Puso
(Lawrence Livermore Nat'l Lab)
-
Keynote
A discrete energy consistent, momentum conserving approach for implicit dynamic contact with displacement and velocity constraints
M. Puso -
A Reverse Constrained Preconditioner for the Lagrange Multipliers Method in Contact Mechanics
A. Franceschini , M. Frigo , C. Janna , M. Ferronato -
Massively Parallel Hybrid Domain Decomposition Algorithm for Solving Huge Contact Problems
Z. Dostal , T. Brzobohaty , D. Horak -
Reduced Interface Models for Haptic Contact With Flexible Systems
S. Arbatani , J. Kovecses
Organized by: Prof. Ronaldo I. Borja (Stanford University), Prof. WaiChing Sun (Columbia University), Prof. Wei Wu (University of Natural Resources and Life Sciences)
Corresponding Organizer:
Prof.
Ronaldo Borja
(Stanford University)
Chaired by:
Prof. Ronaldo Borja
(Stanford University)
-
FVM-based phase-field model for brittle fracture with adaptive mesh refinement
N. Guo , X. Yang , Z. Yang -
Anisotropic Bounding Surface Model for Clay Under Monotonic and Cyclic Loading Conditions
Z. Yang , Y. Yu -
Treating Bedding Planes with Distinction: Laminated Rocks Are beyond just Anisotropic Continua
Y. Zhao -
Anisotropic poromechanics of gas flow in sedimentary rocks
Q. Zhang , Z. Yin -
Drained Instability of Granular Soils from Microscopic Perspectives
J. Yang , L. Zhang -
Numerical Investigation of Cyclic Energy Piles Considering Thermo-Plasticity of Soil
S. Zhang , X. Zhao , Q. Zhang , C. Ng
Chaired by: Sr. Carlos Moreira (CIMNE/UPC) and Mr. Juan Manuel Martínez (ArcelorMittal Global R&D)
-
Thermal analysis of 3D printing processes in the reference frame of the moving heat source
M. Slimani , M. Cervera , M. Chiumenti -
A scalable thermo-mechanical framework for the part-scale analysis in metal additive manufacturing processes
C. Moreira , M. Caicedo , M. Cervera , M. Chiumenti , J. Baiges -
Thermo-mechanical simulation of annealing heat treatment in laser powder bed fusion additive manufacturing
X. Lu , M. Chiumenti , M. Cervera -
Numerical Analysis Of Wire Laser Additive Manufacturing For Low Carbon Steels
J. Martínez Alvarez , M. Chiumenti -
Performance Analysis of Additively Manufactured Polymeric Auxetic Structuers
S. Farshbaf , N. Dialami , M. Cervera
Organized by: Dr. Emilio Martinez-Pañeda (Imperial College London), Prof. Christian Niordson (Technical University of Denmark), Prof. Benjamin Klusemann (Leuphana University of Lüneburg)
Corresponding Organizer:
Prof.
Emilio Martinez-Pañeda
(University of Oxford)
Chaired by:
Prof. Emilio Martinez-Pañeda
(University of Oxford)
-
Keynote
Understanding Microstructures and their Properties with Data Mining and Machine Learnig-based Predictions
S. Sandfeld -
Phase-field modeling of localized corrosion in polycrystalline materials
M. Makuch , S. Kovacevic , M. Wenman , E. Martinez-Pañeda -
A Phase-Field-Based Chemo-Mechanical Model for Corrosion-Induced Cracking In Reinforced Concrete
E. Korec , M. Jirasek , H. S. Wong , E. Martínez-Pañeda -
Modelling of Running Ductile Fracture by Coupling the Phase-Field Evolution with a Local Damage Model
A. Sur , O. Hopperstad , D. Morin , G. Gruben -
Modelling of Piezoresistive Fracture in Carbon Nanotube-Based Composites
L. Quinteros , E. Martinez-Pañeda , E. García-Macías
Organized by: Dr. Varvara Kouznetsova (Eindhoven University of Technology), Prof. Jörg Schröder (University Duisburg-Essen), Prof. Kenjiro Terada (Tohoku University)
Corresponding Organizer:
Dr.
Varvara Kouznetsova
(Eindhoven University of Technology)
Chaired by:
Dr. Mayu Muramatsu
( Keio University)
-
Keynote
Novel Architectures of Deep Neural Networks for Universal Predictions of Elasticity Tensors in Homogenization
B. Eidel -
Adaptive techniques for MOR of unitcells in non-linear FE simulations
Y. Özmen , R. Niekamp , P. Nigro , J. Schröder -
Efficient Two-Scale Simulations of Geometrically Parameterized Elasto-Plastic Microstructures
T. Guo , O. Rokos , K. Veroy -
Investigation on Optimal Microstructure of Dual Phase Steel with High Strength and Ductility by Machine Learning
M. Suzuki , K. Shizawa , M. Muramatsu -
A k-means Clustering FE2 Method Based on Unsupervised Machine Learning for Nonlinear Multiscale Calculations
S. Chaouch , J. Yvonnet
Organized by: Prof. Giovanna Xotta (University of Padova), Prof. Ignacio Carol (Technical University of Catalonia)
Corresponding Organizer:
Dr.
Giovanna Xotta
-
A Numerical Model for Frictional Contact Mechanics in Hydraulic Fracturing Applications
M. Ferronato , A. Franceschini , L. Gazzola -
HPC of concrete specimens subject to External Sulfate Attack at the meso-level using interface elements
C. Biscaro , C. López , G. Xotta , I. Carol -
Numerical Modelling of Limited Entry Technique: Application to Hydraulic Fracture Completion Design.
A. Perez , J. Alvarellos , D. Garolera , I. Carol
Chaired by: Prof. Eduardo de Souza Neto
-
Phase field for compaction band formation: Capture of grain crushing and permeability evolution in heterogeneous media
R. Borja -
Automated model discovery – A new paradigm in computational mechanics?
E. Kuhl -
Advances In Particle Finite Element Method For The Simulation Of Phase Change Problems And Fluid-Structure Interactions
J. Ponthot
Organized by: Prof. Fadi Aldakheel (Leibniz Universität Hannover), Prof. Edoardo Artioli (Università degli Studi di Roma Tor Vergata), Mr. Lourenço Beirão Da Veiga (Università di Milano-Bicocca), Prof. Peter Wriggers (Leibniz University of Hannover)
Corresponding Organizer:
Prof.
Fadi Aldakheel
(Leibniz Universität Hannover)
Chaired by:
Prof. Edoardo Artioli
(University of Rome "Tor Vergata")
,
Mr. Lourenco Beirao da Veiga
(Università di Milano-Bicocca)
-
Keynote
Virtual Elements for Phase Field Modeling of Fracture in Plates
F. Aldakheel , B. Hudobivnik , J. Korelc , P. Wriggers -
A C1 -Conforming Arbitrary-Order Two-Dimensional Virtual Element Method for the Fourth-Order Phase-field Equation
G. Manzini , D. Adak , H. Mourad , J. Plohr , L. Svolos -
A boundary virtual element method for solving electromagnetic scattering problems in the frequency domain
A. Touzalin , E. Arcese , S. Pernet -
Virtual elements for the treatment of three dimensional contact
M. Cihan , B. Hudobivnik , P. Wriggers
Chaired by: Prof. Sergio Oller (CIMNE/UPC)
-
A Numerical Framework For Modelling Tire Mechanics Accounting For Composite Materials, Large Strains And Frictional Contact
A. Cornejo , L. Barbu , P. Wriggers , S. Oller , E. Oñate -
Multiresonant Layered Acoustic Metamaterials (MLAM): Computational Design and Optimization
G. Sal Anglada , D. Yago Llamas , J. Cante Teran , J. Oliver Olivella , D. Roca Cazorla -
A Universal Yield Surface for Metamaterials
N. Baghous , I. Barsoum , R. Abu Al-Rub -
Modeling the influence of temperature and moisture on the elasto-plastic behavior of paper and paperboard
N. Kopic-Osmanovic , H. Schubert , S. Rief , J. Orlik , H. Andrä , M. Hauptmann , J. Simon -
Finite element analysis on subsequent yield surfaces of cellular composites
L. Liu , H. Chen
Chaired by: Mr. Houdich (Eidgenössische Technische Hochschule) and Dr. Bostanabad (UCI)
-
Physically Meaningful Samples in Randomized Local Model Order Reduction
P. Diercks , A. Robens-Radermacher , K. Veroy , J. Unger -
Multiscale Damage via Physics-Informed Recurrent Neural Networks
S. Deng , S. Hosseinmardi , R. Bostanabad -
A Multi Time Stepping Algorithm for the Modelling of Heterogeneous Structures with Explicit Time Integration
K. Chan , N. Bombace , D. Sap , K. Bronik , N. Petrinic -
Sources of Uncertainty in Crystal Plasticity
G. Castelluccio -
Coupling Mechanics with Spinodal Decomposition Phenomena
H. Oudich , P. Carrara , L. De Lorenzis -
Co-Design of variational formulations of a coupled deformation-diffusion problem and the parallel FROSch solver
S. Prüger , F. Röver , B. Kiefer , O. Rheinbach
Organized by: Prof. Javier Segurado (Technical University of Madrid), Prof. Jaime Marian (INEGI), Prof. Samuel Forest (Armines Mines ParisTech)
Corresponding Organizer:
Prof.
Javier Segurado Escudero
(Universidad Politécnica de Madrid / IMDEA Materials Institute)
Chaired by:
Prof. Samuel Forest
(Armines Mines ParisTech)
-
Keynote
Role of Grain Boundary Stress Fields and their Evolution on Dislocation Transmission via Discrete Dislocation Dynamics Simulations
D. Bamney , L. Capolungo , D. Spearot -
Validation of Mesoscale Field Dislocation Mechanics: micropillar confined thin-film plasticity and kink-banding in nanolaminates at finite deformation
A. Arora , R. Arora , A. Acharya -
Investigation of Grain Boundary Properties at Finite Temperature via Upscaling with the Gaussian Phase Packets Formulation
M. Spinola , S. Saxena , D. Kochmann , P. Gupta -
Predicting and designing the thermo-elasto-plastic response of composites using deep material network
R. Dingreville , D. Shin , R. Alberdi , R. Lebensohn -
On the comparison between monolithic and staggered solvers in a FFT-based framework for Phase-Field fracture.
P. Aranda , J. Segurado
Chaired by: Dr. Stefan Kollmannsberger (Technische Universität München)
-
Ductile Fracture Simulation using Gurson-Cohesive Model (GCM) in 3D
J. Park , S. Kweon , K. Park -
Mechanical Behavior of Porous Ductile Materials Under Dynamic Loading: Interaction of Voids
M. El Ansi , C. Sartori , C. Czarnota -
Ductile Fracture Simulations using XFEM and an Instability-based Crack Initiation Criterion
S. Rajeev , S. Keralavarma -
Viscoplastic cohesive zone model dedicated to overfragmentation of pressurized nuclear ceramics at high temperature
C. Tosi , R. Largenton , Y. Monerie , P. Vincent -
On the transition from diffusive to discrete crack topologies in crack phase-field model
J. Han , Y. Shintaku , S. Moriguchi , K. Terada -
A Plastic-Damage-Cracking Model for Tensorial Crack Opening
A. Daneshyar , L. Herrmann , O. Oztoprak , L. Hug , S. Kollmannsberger
Organized by: Prof. Alan Needleman (Texas A&M University), Prof. Ahmed Benallal (ENS Paris Saclay/CNRS), Amine Benzerga (Texas A&M University), Dr. David Morin (Norwegian University of Science and Technology)
Corresponding Organizer:
Prof.
A. Needleman
(Texas A&M University)
Chaired by:
Prof. Ahmed Benallal
(ENS Paris Saclay/CNRS)
-
Keynote
Numerical Modelling of Ductile Fracture Involving Two Length Scales
J. Faleskog , S. Wang -
A Numerical Model to Study Effects of Void Size Distribution on Ductile Failure
L. Dæhli , D. Morin , J. Faleskog , O. Hopperstad -
Void growth in ductile materials with actual porous microstructures
A. Vishnu , G. Vadillo , J. Rodríguez-Martnez -
The effect of phase continuity and plastic anisotropy on the onset and evolution of adiabatic shear band
S. Osovski -
A Shear Modified Enhanced Gurson Constitutive Relation with Implications for Localization
I. Khan , A. Benzerga , A. Needleman
Chaired by: Mr. Eugenio José Muttio Zavala (Swansea University) and Ms. Reem Alhayki (Swansea University)
-
Computational Homogenization of Arbitrary Heterogeneous Mesostructures with Inelastic Constitutive Behavior using Machine Learning Methods
J. Stöcker , E. Elsayed , F. Aldakheel , M. Kaliske -
Graph-based Representation of Elastoplastic Material Response in the Data-driven Framework
H. Dandin , A. Leygue , L. Stainier -
A Neural Network Based Strategy for the Modelling of Constitutive Behaviour of Solids Applied to Porous Elasto-Plastic Material
R. Alhayki , E. Muttio , W. Dettmer , D. Perić -
Automated, machine learning based surface crack detection in fracture experiments
N. Karathanasopoulos , P. Hadjidoukas , D. Mohr -
A Neural Network Based Surrogate Model for Inelastic Solid Materials Simulations
E. Muttio Zavala , R. Alhayki , W. Dettmer , D. Peric -
Machine Learning and Data Mining of Dislocation Simulations
A. Demirci , S. Sandfeld
Chaired by: Dr. Mike Puso (Lawrence Livermore Nat'l Lab)
-
Wireframe Modeling of Overhead Conductors for Life Time Prediction
K. Aït Ammar , P. Guidault , P. Boucard , J. Said , F. Hafid -
Use of Neural Networks to Classify the Conformity of Wheel-Rail Contact Based on Families of Profiles
M. Moreira Lopes , V. Alves de Lima , I. Machado , R. Martins Souza , N. Kiyoshi Fukumasu , F. Profito , L. Driemeier -
Overview of Coupled Hydro-mechanical Interfaces in Numerical Modelling of Uplifting
S. Mei , M. Peng , Y. Tian , M. Cassidy -
Development of a simplified model for the transient dynamic analysis of bolted assemblies
Q. Lançon , P. Guidault , P. Boucard , N. Vallino -
A Variationally Consistent Contact Formulation Based on Mixed Interpolation Method and Isogeometric Discretization
T. Duong , J. Kiendl , L. leonetti -
An Unbiased Surface-to-Surface Frictional Contact Algorithm for Higher Order Finite Elements
I. Sahu , N. Petrinic
Chaired by: Prof. Ignacio Carol (UPC)
-
A Dynamic ALE Framework for Structures with Inelastic Material Properties Under Moving Loads
A. Anantheswar , I. Wollny , M. Kaliske -
Hydro-mechanical simulation of bentonite-based materials in a large-scale oedometer
C. Rodríguez , R. Vasconcelos , A. Gens , J. Vaunat , M. Villar -
A data-driven framework for breakage mechanics in granular media
J. Ulloa , A. Gorgogianni , K. Karapiperis , M. Ortiz , J. Andrade -
Extension to H/S of the M-AGC tangent operator and Visco-Plastic Relaxation strategies using zero-thickness interface elements
I. Jaqués , I. Carol
Chaired by: Prof. Mirna Poggi (Politecnico di Torino) and Prof. Jerzy Rojek (Institute of Fundamental Technologica) and
-
Numerical Simulation for Repair Process by Laser Cladding of SUS316L on SUS304 Substrate
T. Izumi , M. Arai -
Predictive Capability of 3DExperience (3DX) in Assesing Deformation Induced by Different Scanning Strategies in Laser Powder Directed Energy Deposition (LP-DED) Process
M. Poggi , E. Atzeni , L. Luliano , A. Salmi , M. Vallone , M. Damasio -
Pharmaceutical Powder Compaction Analysis by the Drucker-Prager/Cap Model with Density Related Mechanical Behaviour
S. Ishikawa , D. Mizunaga -
Discrete Element Modelling of Multiphysics Phenomena in Powder Sintering Processes
J. Rojek , F. Nisar , S. Nosewicz , M. Chmielewski , K. Kaszyca -
A Coupled FEM-FCM Approach for the Stress Analysis of Porous Die Castings
U. Gabbert , S. Ringwelski , M. Würkner , M. Kittsteiner
Organized by: Prof. Herbert Mang (Vienna University of Technology), Prof. Yong Yuan (Tongji University), Prof. Bernhard Pichler (TU Wien)
Corresponding Organizer:
Prof.
Herbert Mang
(Vienna University of Technology)
Chaired by:
Prof. Herbert Mang
(Vienna University of Technology)
,
Prof. Bernhard Pichler
(TU Wien)
-
Investigation on Bending Mechanism of Longitudinal Joints Based on Analytical Solution of a Flat Rectangular Plate
Z. liu , X. liu , A. Alsahly , G. Meschke -
Tunnel Construction Simulation Based on Shell-contact Model
Y. Gap , X. LIU -
Mesoscale Modeling of High-performance Fiber-reinforced Concrete Under Monotonic and Cyclic Loading
K. Daadouch , V. Gudžulić , G. Meschke -
Fire-induced tensile core cracking of compressed columns of a closed-frame reinforced concrete structure
M. Sorgner , R. Díaz Flores , H. Wang , C. Hellmich , B. Pichler
Organized by: Dr. Varvara Kouznetsova (Eindhoven University of Technology), Prof. Jörg Schröder (University Duisburg-Essen), Prof. Kenjiro Terada (Tohoku University)
Corresponding Organizer:
Dr.
Varvara Kouznetsova
(Eindhoven University of Technology)
Chaired by:
Dr. Varvara Kouznetsova
(Eindhoven University of Technology)
-
Multiscale Finite Element Methods for heterogeneous plates
F. Legoll , V. Ehrlacher , A. Lebee , A. Lesage -
Wang tiles for modeling and simulating random heterogeneous materials
M. Doškář , J. Novák , J. Zeman -
Two-scale Analysis of Elastoplastic Material by Means of RBF-Based Surrogate Model
Y. Yamanaka , S. Matsubara , N. Hirayama , S. Moriguchi , K. TERADA -
Computational Homogenization With Improved Minimal Kinematical Condition For Nonperiodic Microstructures
A. Nakamura , Y. Yamanaka , Y. Shintaku , S. Moriguchi , K. Terada -
Multiscale Modeling of Laminated Thin-shell Structures with Direct FE2
J. Zhi , K. Leong , K. Yeoh , T. Tay , V. Tan -
Multi-Scale Modelling of Sandwich Structures with Direct FE2 Beam Elements
K. Yeoh , L. Poh , T. Tay , V. Tan
Organized by: Prof. Frederic Legoll (ENPC), Prof. Jan Zeman (Czech Technical University in Prague)
Corresponding Organizer:
Prof.
Frederic Legoll
(ENPC)
Chaired by:
Prof. Frederic Legoll
(ENPC)
,
Prof. Jan Zeman
(Faculty of Civil Engineering, Czech Technical University in Prague)
-
Keynote
An FFT method for implicit dynamics in heterogeneous media: application to polycrystals
R. Sanchi , R. Lebensohn , J. Segurado -
FFT-accelerated Discrete Green's Operator Preconditioned Finite Element Solver for Periodic Homogenization
M. Ladecký , R. Leute , A. Falsafi , I. Pultarová , L. Pastewka , T. Junge , J. Zeman -
Architected Materials Meet Domain Decomposition
P. Antolin , T. Hirschler , A. Buffa -
A multi-scale model to predict the time-dependent degradation of cellulose fibrous networks
E. Bosco , A. Parsa Sadr , A. Suiker -
Multiscale modeling of masonry through a numerical yield design homogenization method
E. Donval , D. Pham , G. Hassen , P. de Buhan , M. Vigroux
Thu, 07/09/2023
19:30 - 23:59
19:30 - 23:59
International Centre for Numerical Methods in Engineering Barcelona, Spain
complas_sec@cimne.upc.edu/ Telf. + 34 - 93 405 46 94
Copyright © 2022 CIMNE, All Rights Reserved. Terms of service
complas_sec@cimne.upc.edu/ Telf. + 34 - 93 405 46 94
Copyright © 2022 CIMNE, All Rights Reserved. Terms of service
