Complas 2023

COMPLAS 2023

WEm-204a - IS204a - Towards Designing 3D Printed Components with Functionally Graded Metamaterials

Main Organizer: Prof. Francisco Javier Montáns Leal ( Universidad Politécnica de Madrid , Spain )
Organized by: Prof. Francisco J. MontÃ¡ns (Universidad PolitÃ©cnica de Madrid), Prof. Luis Barrales-Mora (Georgia Institute of Technology), Prof. Francisco Chinesta (ENSAM ParisTech), Dr. Luis Saucedo-Mora (Universidad PolitÃ©cnica de Madrid)

Wed, 06/09/2023
11:30 - 13:30
A3 - 101
WEm-204a

Chaired by:
Phd. Juan Garcia-Martinez (INTA , Spain) , Dr. Luis Saucedo Mora (Universidad Politécnica de Madrid , Spain)

Scheduled presentations:

Melt Track Morphology Based Optimisation in LPBF with Deep Learning
*T. Wilkinson (Universidad Politécnica de Madrid), M. Casata (Universidad Politécnica de Madrid), D. Barba (Universidad Politécnica de Madrid)
Investigating the Effect of Size and Orientation on the Quality of LPBF Metamaterial Cells in TI64
*M. Casata (Universidad Politécnica de Madrid), S. Perosanz Amarillo (Universidad Politécnica de Madrid), D. Barba Cancho (Universidad Politécnica de Madrid)
On the Influence of the Lattice Geometry on the Mechanical Properties of Additively Manufactured Metamaterials
*C. Garrido (Universidad Politécnica de Madrid), E. Alabort (Alloyed Ltd), D. Barba (Universidad Politécnica de Madrid)
Experimental and CPFEM based study on IN738LC superalloy processed by laser powder bed fusion
*J. Chen (Georgia Institute of Technology), J. Xu (Linköping University), J. Moverare (Linköping University), L. Barrales-Mora (Georgia Institute of Technology)
A Gibson-Ashby Model for Graded 2D Cellular Solids
*M. Beigrezaee (University of Trento), S. Jalali (University of Trento), D. Misseroni (University of Trento), N. Pugno (University of Trento)