WEm-204a - IS204a - Towards Designing 3D Printed Components with Functionally Graded Metamaterials
Organized by: Prof. Francisco J. Montáns (Universidad Politécnica de Madrid), Prof. Luis Barrales-Mora (Georgia Institute of Technology), Prof. Francisco Chinesta (ENSAM ParisTech), Dr. Luis Saucedo-Mora (Universidad Politécnica de Madrid)Corresponding Organizer: Prof. Francisco Javier Montáns Leal (Universidad Politécnica de Madrid)
Chaired by:
Phd. Juan Garcia-Martinez (INTA , Spain) , Dr. Luis Saucedo Mora (Universidad Politécnica de Madrid , Spain)
Phd. Juan Garcia-Martinez (INTA , Spain) , Dr. Luis Saucedo Mora (Universidad Politécnica de Madrid , Spain)
Scheduled presentations:
-
Melt Track Morphology Based Optimisation in LPBF with Deep Learning
T. Wilkinson*, M. Casata, D. Barba -
Investigating the Effect of Size and Orientation on the Quality of LPBF Metamaterial Cells in TI64
M. Casata*, S. Perosanz Amarillo, D. Barba Cancho -
On the Influence of the Lattice Geometry on the Mechanical Properties of Additively Manufactured Metamaterials
C. Garrido*, E. Alabort, D. Barba -
Experimental and CPFEM based study on IN738LC superalloy processed by laser powder bed fusion
J. Chen*, J. Xu, J. Moverare, L. Barrales-Mora -
A Gibson-Ashby Model for Graded 2D Cellular Solids
M. Beigrezaee*, S. Jalali, D. Misseroni, N. Pugno
International Centre for Numerical Methods in Engineering Barcelona, Spain
complas_sec@cimne.upc.edu/ Telf. + 34 - 93 405 46 94
Copyright © 2022 CIMNE, All Rights Reserved. Terms of service
complas_sec@cimne.upc.edu/ Telf. + 34 - 93 405 46 94
Copyright © 2022 CIMNE, All Rights Reserved. Terms of service
